Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 64,36
(excl. BTW)
€ 77,88
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending 7 stuk(s) vanaf 23 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 64,36 |
| 5 - 9 | € 61,79 |
| 10 - 24 | € 60,51 |
| 25 + | € 59,24 |
*prijsindicatie
- RS-stocknr.:
- 339-8669
- Fabrikantnummer:
- FY 35 TF
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Bearing Unit | |
| Inside Diameter | 35 mm | |
| Number of Mount Holes | 4 | |
| Material | Cast Iron | |
| Length | 118mm | |
| Width | 118 mm | |
| Depth | 46.4mm | |
| Mount Hole Size | 14 mm | |
| Mount Hole Centre-to-Centre | 92mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Bearing Unit | ||
Inside Diameter 35 mm | ||
Number of Mount Holes 4 | ||
Material Cast Iron | ||
Length 118mm | ||
Width 118 mm | ||
Depth 46.4mm | ||
Mount Hole Size 14 mm | ||
Mount Hole Centre-to-Centre 92mm | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- IT
SKF Cast-Iron Flange Bearing Unit, 4 Holes, 35mm ID - FY 35 TF
This SKF flange bearing unit is made up of a spherical bearing insert held in a square casing. Thanks to the four mounting holes, it's simple to attach to the body of a machine or on a wall. The flange design holds the bearing insert in place to prevent axial movement for greater stability. It's sealed using nitrile and fabric seals for resistance to dust, oil and moisture. Keeping contaminants out and lubricants in ensures high levels of efficiency and minimal maintenance.
• Cast-iron housing material has excellent impact resistance for long-lasting performance
• Limiting speed of 5300rpm (rotations per minute) for use in high-speed applications
• Additional flingers provide added protection against dust and moisture by pitching contaminants away
Applications
• Material handling applications
• Power transmission
• Agricultural equipment
What hardware do I need to mount this unit?
This unit is simple to mount. Insert it on a machine shaft and tighten it in place with M6 x 0.75 set screws. You can also use 12mm attachment bolts to lock it in place. The recommended tightening torque is 4Nm.