Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 38,98
(excl. BTW)
€ 47,17
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 6 stuk(s) vanaf 13 april 2026
- Plus verzending 14 stuk(s) vanaf 13 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 38,98 |
| 5 - 9 | € 37,41 |
| 10 - 24 | € 36,63 |
| 25 + | € 35,85 |
*prijsindicatie
- RS-stocknr.:
- 339-8631
- Fabrikantnummer:
- FY 20 TF
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Bearing Unit | |
| Inside Diameter | 20mm | |
| Number of Mount Holes | 4 | |
| Material | Cast Iron | |
| Length | 86mm | |
| Width | 86mm | |
| Depth | 37.3mm | |
| Mount Hole Size | 11.5 mm | |
| Mount Hole Centre-to-Centre | 63.5mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Bearing Unit | ||
Inside Diameter 20mm | ||
Number of Mount Holes 4 | ||
Material Cast Iron | ||
Length 86mm | ||
Width 86mm | ||
Depth 37.3mm | ||
Mount Hole Size 11.5 mm | ||
Mount Hole Centre-to-Centre 63.5mm | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- IT
SKF 4-Hole Mount Flange Bearing Unit, 20mm ID, 86mm Length - FY 20 TF
Stabilise the axial movement of your mechanical shaft using this SKF flange bearing unit. The flanged protrusion on the external ring accurately positions it against a surface or wall. You can bolt it securely via the holes on the housing material. A depth of 37.3mm means you can attach this device snugly into the internal components of your preferred installation. It has a relatively low weight of 0.54kg so you can install it manually and without risk of strain on your setup. This bearing unit lets you smoothly operate shafts in domestic and commercial applications.
• Cast iron body material for durability and long service life
• 86mm length for stability
• Bolted installation makes it resistant to vibrations for quiet operation
Applications
• Automotive engineering
• Cleaning equipment
• HVAC (heating, ventilation, and air conditioning) systems
How do I mount this flange bearing unit?
You can use a set screw mechanism by placing this unit on the surface you would like to attach it to and inserting M6 x 0.75 screws into each hole. Tighten these to a torque degree of 4Nm. You can also install it via attachment bolts with a 10mm diameter.