NSK-RHP 2 Hole Taper, LFTC20 R 20 mm ID
- RS-stocknr.:
- 785-4700
- Fabrikantnummer:
- LFTC20 R
- Fabrikant:
- NSK-RHP
Afbeelding representeert productcategorie
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 39,90
(excl. BTW)
€ 48,28
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 19 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 39,90 |
| 5 - 9 | € 38,31 |
| 10 - 24 | € 37,51 |
| 25 + | € 36,70 |
*prijsindicatie
- RS-stocknr.:
- 785-4700
- Fabrikantnummer:
- LFTC20 R
- Fabrikant:
- NSK-RHP
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | NSK-RHP | |
| Product Type | Bearing Unit | |
| Inside Diameter | 20 mm | |
| Number of Mount Holes | 2 | |
| Material | Synthetic Rubber, Pressed Steel, Cast Iron, Nitrile Rubber, Mild Steel | |
| Length | 90.5mm | |
| Width | 66.5 mm | |
| Depth | 27.76mm | |
| Mount Hole Size | 8 mm | |
| Mount Hole Centre-to-Centre | 71.5mm | |
| Standards/Approvals | ISO H7, ISO h9, ISO N7, ISO h6 | |
| Bore Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk NSK-RHP | ||
Product Type Bearing Unit | ||
Inside Diameter 20 mm | ||
Number of Mount Holes 2 | ||
Material Synthetic Rubber, Pressed Steel, Cast Iron, Nitrile Rubber, Mild Steel | ||
Length 90.5mm | ||
Width 66.5 mm | ||
Depth 27.76mm | ||
Mount Hole Size 8 mm | ||
Mount Hole Centre-to-Centre 71.5mm | ||
Standards/Approvals ISO H7, ISO h9, ISO N7, ISO h6 | ||
Bore Type Taper | ||
Vrijgesteld
- Land van herkomst:
- GB
Self-Lube Bearing Units
Two bolt flange bearing units from NSK. Made from cast iron these self lubricated units are robust and long lasting. These bearing units are easy to fit and can be removed without any breakage allowing for easy re-fitting.
Sealed bearing units to suit shaft diameters from 12mm to 40mm and from ½ in. to 1 in.
Made from cast iron to BS1452
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals
C3 internal radial clearance
Two-Bolt Flange Bearings - NSK
Supplied with
Grease nipples and full fitting instructions.
Gerelateerde Links
- NSK-RHP 2 Hole Taper, SLFL20 R 20 mm ID
- NSK-RHP 4 Hole Taper, SF20 R 20 mm ID
- NSK-RHP 2 Hole Taper, SF25 R 25 mm ID
- NSK-RHP 2 Hole Taper, SFT15 R 15 mm ID
- NSK-RHP 3 Hole Taper, SLFE25 R 25 mm ID
- NSK-RHP 2 Hole Taper, SLFL16 R 16 mm ID
- NSK-RHP 2 Hole Taper, SFT16 R 16 mm ID
- NSK-RHP 2 Hole Taper, LFTC16 R 16 mm ID