SMC Blower Gun High Efficiency Nozzle, 0 → 10bar, -5 → 60°C

  • RS-stocknr. 721-3874
  • Fabrikantnummer KNH-R02-150
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Blowgun (VMG)

The SMC VMG series of blow guns have a large effective area without nozzle. Pressure loss is 0.725psi (0.005MPa) or less when a nozzle bore size of 2.5mm is used.

Energy saving
Shock resistant body
Gun body made from high impact, shock resistant resin
Not affected by supply presure
Trigger mechanism gripping force the same at high and low pressure
Resin body lever type
White or dark blue body colour versions available

Note

Nozzle not supplied with blowgun.

Note

To be used with the SMC blow gun, please see RS stock number 690-0212

Specificaties
Kenmerk Waarde
Type High Efficiency Nozzle
Working Pressure 0 → 10bar
Air Inlet BSP 1/4in
Maximum Operating Temperature +60°C
Minimum Operating Temperature -5°C
6 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Bag of 2
73,46
(excl. BTW)
88,89
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 +
€ 73,46
€ 36,73
*prijsindicatie
Related Products
High blowing forceEasily regulated infinite blowValve package allowing ...
Description:
High blowing forceEasily regulated infinite blowValve package allowing gun to handle both air and non-explosive liquidsLeft and right hand operatedLightweight designHook for easy storage and hangingErgonomic Acetalplastic handle designed to shield against cold air flowAirflow: 500l/min.
High blowing forceEasily regulated infinite blowValve package allowing ...
Description:
High blowing forceEasily regulated infinite blowValve package allowing gun to handle both air and non-explosive liquidsLeft and right hand operatedLightweight designHook for easy storage and hangingErgonomic Acetalplastic handle designed to shield against cold air flowAirflow: 500l/min.
High blowing forceEasily regulated infinite blowValve package allowing ...
Description:
High blowing forceEasily regulated infinite blowValve package allowing gun to handle both air and non-explosive liquidsLeft and right hand operatedLightweight designHook for easy storage and hangingErgonomic Acetalplastic handle designed to shield against cold air flowAirflow: 500l/min.
This small, very compact and standalone hot air ...
Description:
This small, very compact and standalone hot air station is used for desoldering large CMS.The air flow and temperature can be adjusted at any time. Heating element power is 700 W, and the integrated fan blade is simply activated by ...