LM Technologies LM930-0635 Bluetooth Chip 4.1

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

LM930 Bluetooth Smart Module (with U.FL Connector)

The LM930 from LM Technologies is a Bluetooth Smart Module 4.1 BLE, featuring a U.FL connector. It enables you to communicate with other Bluetooth Smart devices up to 110m in open space.
The LM930 is used as a peripheral device in things such as monitors, meters and printers. The LM930 is a fully integrated module, enabling you to save space on the PCB.

Features and Benefits
Bluetooth V4.1
14 mA current consumption (at 0 dBm)
U.FL connector
I2C and UART
4 x PWM channels

Bluetooth - LM Technologies

Specificaties
Kenmerk Waarde
Bluetooth Class Class 1
Bluetooth Version 4.1
Maximum Output Power +9dBm
Receiver Sensitivity -92dBm
Supported Bus Interfaces AIO, I2C, PIO, SPI, UART
Supported I/O Interfaces Serial
Dimensions 22 x 10.11 x 2.5mm
Height 2.5mm
Length 22mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Width 10.11mm
183 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
15,61
(excl. BTW)
18,89
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 15,61
10 - 49
€ 14,05
50 - 99
€ 12,78
100 - 199
€ 11,72
200 +
€ 10,03
Related Products
The PAN1316/1326 series from Panasonic are Host Controlled ...
Description:
The PAN1316/1326 series from Panasonic are Host Controlled Interface (HCI) Dual Mode Bluetooth modules with Enhanced Data Rate (EDR) featuring both Bluetooth Low Energy and Bluetooth Classic connectivity. These modules contain the seventh generation CC2564 Bluetooth core integrated circuit from ...
The RN4871 is a small form factor, Bluetooth ...
Description:
The RN4871 is a small form factor, Bluetooth Low Energy module measuring just 9 x 11.5 x 2.1 mm. This fully-integrated module is designed for easy implementation into a broad range of applications. It delivers up to 2.5x throughput improvement ...
The RN52 Bluetooth audio module provides a fully ...
Description:
The RN52 Bluetooth audio module provides a fully integrated solution for delivering high-quality stereo audio in a small form factor. It combines a Class 2 Bluetooth radio with an embedded DSP processor, controlled and configured by simple ASCII commands and ...
MDBT42Q is a BT 4.0, BT 4.1 and ...
Description:
MDBT42Q is a BT 4.0, BT 4.1 and BT 4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors. ...