Panasonic ENW89847A3KF Bluetooth Chip 4.2

  • RS-stocknr. 174-1905
  • Fabrikantnummer ENW89847A3KF
  • Fabrikant Panasonic
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The PAN1760A is Panasonic’s next generation Bluetooth module with the industry’s lowest power Bluetooth Low Energy SoC.

Small 15.6 mm x 8.7 mm x 1.9 mm SMD module
Embedded 256 kB flash memory and 192 kB internal RAM 83 kB RAM available for user application
AT Command mode, Host mode, Stand-Alone mode
Standard SIG BLE profiles as well as SPPoverBLE profile
Over-the-Air firmware update
Support for Scatternet/Mesh network
BT 4.2 secure connections support through
Elliptic-Curve-DH Cryptography
AES-128 hardware encryption (FIPS-approved)
Frequent changing of device address (improved privacy, reduced tracking ability)
Larger packet sizes (more efficient application and network layer security)
Receiver sensitivity -93 dBm typ.
Output power 0 dBm maximum setting
Power supply 1.8 V to 3.6 V single operation voltage
Transmit and receive 3.3 mA Tx/Rx peak power consumption

Specificaties
Kenmerk Waarde
Bluetooth Class Class 2
Bluetooth Version 4.2
Maximum Output Power 0dBm
Receiver Sensitivity -93dBm
Dimensions 15.6 x 8.7 x 1.8mm
Height 1.8mm
Length 15.6mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 8.7mm
1000 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (On a Reel of 500)
6,261
(excl. BTW)
7,576
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
500 - 500
€ 6,261
€ 3.130,50
1000 +
€ 5,322
€ 2.661,00
*prijsindicatie
Related Products
The Blue Gecko BGM111 Bluetooth Smart module integrates ...
Description:
The Blue Gecko BGM111 Bluetooth Smart module integrates a Bluetooth 2.4GHz RF transceiver, 32-bit ARM Cortex microcontroller and a Bluetooth Smart (BLE) software stack. The on-board microcontroller allows it to operate standalone without an external processor. Bluetooth 4.1 compliant SoC, ...
Panasonic’s new PAN1326C is a Host Controlled Interface ...
Description:
Panasonic’s new PAN1326C is a Host Controlled Interface (HCI) Bluetooth RF module that brings Texas Instrument’s seventh generation Bluetooth core integrated circuit, the CC2564C, to an easy-to- use module format. The PAN1326C is Bluetooth-4.2 compliant and it offers best-in-class RF ...
MDBT42Q is a BT 4.0, BT 4.1 and ...
Description:
MDBT42Q is a BT 4.0, BT 4.1 and BT 4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors. ...
WT32i is an audio specific Bluetooth 3.0 module ...
Description:
WT32i is an audio specific Bluetooth 3.0 module with radio frequency performance and enhanced audio features, allowing a best in class Bluetooth audio experience. WT32i comprises of Bluegiga's iWRAP6 Bluetooth stack software which implements A2DP, AVRCP v.1.5 profiles and supports ...