Vishay Bridge Rectifier, 200 V 50 A, 4-Pin Single
- RS-stocknr.:
- 165-6985
- Fabrikantnummer:
- EDF1DS-E3/77
- Fabrikant:
- Vishay
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 165-6985
- Fabrikantnummer:
- EDF1DS-E3/77
- Fabrikant:
- Vishay
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Vishay | |
| Product Type | Bridge Rectifier | |
| Peak Reverse Repetitive Voltage Vrrm | 200V | |
| Mount Type | Surface | |
| Number of Phases | 1 | |
| Package Type | DFS | |
| Pin Count | 4 | |
| Configuration | Single | |
| Maximum Operating Temperature | 150°C | |
| Minimum Operating Temperature | -55°C | |
| Forward Current If | 1A | |
| Peak Non-Repetitive Forward Surge Current Ifsm | 50A | |
| Peak Forward Voltage Vf | 1.05V | |
| Height | 3.3mm | |
| Standards/Approvals | No | |
| Series | EDF | |
| Peak Reverse Current Ir | 1mA | |
| Length | 8.51mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Vishay | ||
Product Type Bridge Rectifier | ||
Peak Reverse Repetitive Voltage Vrrm 200V | ||
Mount Type Surface | ||
Number of Phases 1 | ||
Package Type DFS | ||
Pin Count 4 | ||
Configuration Single | ||
Maximum Operating Temperature 150°C | ||
Minimum Operating Temperature -55°C | ||
Forward Current If 1A | ||
Peak Non-Repetitive Forward Surge Current Ifsm 50A | ||
Peak Forward Voltage Vf 1.05V | ||
Height 3.3mm | ||
Standards/Approvals No | ||
Series EDF | ||
Peak Reverse Current Ir 1mA | ||
Length 8.51mm | ||
Automotive Standard No | ||
- Land van herkomst:
- CN
Bridge Rectifiers for PCB Surface Mount, EDF1xS Series, Vishay Semiconductor
Miniature Glass Passivated Ultrafast Surface Mount Bridge Rectifiers
Ultrafast reverse recovery time for high frequency
High surge current capability
Ideal for automated placement
Printed Circuit Board (PCB) reflow soldering
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.
Approvals
UL, E54214