TE Connectivity, DuraSeal Insulated, Red Crimp Bullet Connector, 22 AWG to 18 AWG, 4 mm Bullet diameter Female
- RS-stocknr.:
- 718-7438
- Fabrikantnummer:
- B-106-8401
- Fabrikant:
- TE Connectivity
Subtotaal (1 eenheid)*
€ 1,91
(excl. BTW)
€ 2,31
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 79 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 640 stuk(s) vanaf 25 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 1,91 |
*prijsindicatie
- RS-stocknr.:
- 718-7438
- Fabrikantnummer:
- B-106-8401
- Fabrikant:
- TE Connectivity
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TE Connectivity | |
| Series | DuraSeal | |
| Product Type | Crimp Bullet Connector | |
| Insulation | Insulated | |
| Insulation Material | Nylon | |
| Gender | Female | |
| Overall Length | 30mm | |
| Minimum Wire Size AWG | 22AWG | |
| Minimum Wire Size mm² | 0.5mm² | |
| Maximum Wire Size AWG | 18AWG | |
| Maximum Wire Size mm² | 1mm² | |
| Bullet Diameter | 4mm | |
| Colour | Red | |
| Contact Plating | Tin | |
| Contact Material | Copper Alloy | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk TE Connectivity | ||
Series DuraSeal | ||
Product Type Crimp Bullet Connector | ||
Insulation Insulated | ||
Insulation Material Nylon | ||
Gender Female | ||
Overall Length 30mm | ||
Minimum Wire Size AWG 22AWG | ||
Minimum Wire Size mm² 0.5mm² | ||
Maximum Wire Size AWG 18AWG | ||
Maximum Wire Size mm² 1mm² | ||
Bullet Diameter 4mm | ||
Colour Red | ||
Contact Plating Tin | ||
Contact Material Copper Alloy | ||
Standards/Approvals No | ||
Duraseal - Bullet Terminal
Duraseal bullet Terminal constructed of tin plated brass with a heat shrinkable insulation sleeve.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed
Gerelateerde Links
- TE Connectivity Red Crimp Bullet Connector 4 mm Bullet diameter Female
- Molex Red Crimp Bullet Connector 3.96 mm Bullet diameter Female
- RS PRO Insulated 22 AWG to 18 AWG, 3.5 mm Bullet diameter Male/Female
- TE Connectivity M5 Stud Size 22 AWG 18 AWG Wire Size, Red
- TE Connectivity M6 Stud Size 22 AWG 18 AWG Wire Size, Red
- TE Connectivity M10 Stud Size 22 AWG 18 AWG Wire Size, Red
- TE Connectivity M4 Stud Size 22 AWG 18 AWG Wire Size, Red
- TE Connectivity DuraSeal Red Insulated Female Spade Connector 6.35 x 0.8 mm Tab Size 22 AWG to 18 AWG