Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Nexperia
	Product Type	D Type Latch
	Logic Family	74HCT
	Logic Function	D Type
	Number of Channels	8
	Polarity	Non-Inverting
	Mount Type	Surface
	Package Type	SO
	Minimum Supply Voltage	4.5V
	Pin Count	20
	Maximum Supply Voltage	5.5V
	Input Level	TTL
	Minimum Operating Temperature	-40°C
	Maximum Propagation Delay Time @ CL	45ns
	Maximum Operating Temperature	125°C
	Height	2.45mm
	Standards/Approvals	No
	Length	13mm
	Width	7.6 mm
	Series	74HCT
	Automotive Standard	No
	Output Type	3 State

	Alles selecteren
	Merk Nexperia
	Product Type D Type Latch
	Logic Family 74HCT
	Logic Function D Type
	Number of Channels 8
	Polarity Non-Inverting
	Mount Type Surface
	Package Type SO
	Minimum Supply Voltage 4.5V
	Pin Count 20
	Maximum Supply Voltage 5.5V
	Input Level TTL
	Minimum Operating Temperature -40°C
	Maximum Propagation Delay Time @ CL 45ns
	Maximum Operating Temperature 125°C
	Height 2.45mm
	Standards/Approvals No
	Length 13mm
	Width 7.6 mm
	Series 74HCT
	Automotive Standard No
	Output Type 3 State

The 74HC373: 74HCT373 is an octal D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the latches. Inputs include clamp diodes. This enables the use of current limiting resistors to Interface inputs to voltages in excess of VCC.

Low switch leakage

Nexperia 74HCT373D,652 D Type Latch, 8-Bit Non-Inverting, 20-Pin SO

Gerelateerde Links