Siemens SENTRON 2 Phase Busbar, 18mm Pitch
- RS-stocknr.:
- 124-3140
- Fabrikantnummer:
- 5ST3704
- Fabrikant:
- Siemens
Subtotaal (1 eenheid)*
€ 20,10
(excl. BTW)
€ 24,32
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 4 stuk(s) vanaf 29 december 2025
- Plus verzending 16 stuk(s) vanaf 29 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 20,10 |
*prijsindicatie
- RS-stocknr.:
- 124-3140
- Fabrikantnummer:
- 5ST3704
- Fabrikant:
- Siemens
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Siemens | |
| Material | Copper | |
| Range | SENTRON | |
| Electrical Phase | 2 | |
| Current Rating | 80A | |
| Series | 5ST | |
| Pitch | 18mm | |
| Alles selecteren | ||
|---|---|---|
Merk Siemens | ||
Material Copper | ||
Range SENTRON | ||
Electrical Phase 2 | ||
Current Rating 80A | ||
Series 5ST | ||
Pitch 18mm | ||
Vrijgesteld
- Land van herkomst:
- DE
Series 5ST3 7 Bus-Bar System
With pin connections
Cut-to-length bar
For 1 or 3-phase line protective switches of the series 5SJ6 and 5SY
No additional connection terminal required for stranded connection up to 35mm²
Excellent accessibility for feeder cable
50→90A load at infeed single-sided/in-centre for 10mm²; 65→120A for 16mm²
Pin type connection
Material: Cu (10mm²); 16mm² fully insulated
Lug spacing: 18mm
Cut-to-length bar
For 1 or 3-phase line protective switches of the series 5SJ6 and 5SY
No additional connection terminal required for stranded connection up to 35mm²
Excellent accessibility for feeder cable
50→90A load at infeed single-sided/in-centre for 10mm²; 65→120A for 16mm²
Pin type connection
Material: Cu (10mm²); 16mm² fully insulated
Lug spacing: 18mm
Standards
DIN 57606, DIN 57659
Siemens Distribution Boards & Accessories
Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used.