ETA Busbar, 24V dc, 59.5mm Pitch

Bekijk alle Busbars

Subtotaal (1 verpakking van 10 eenheden)*

€ 63,49

(excl. BTW)

€ 76,82

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending vanaf 23 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
10 +€ 6,349€ 63,49

*prijsindicatie

RS-stocknr.:
723-4875
Fabrikantnummer:
X222.611.59 BUSBAR (PACK OF 10)
Fabrikant:
ETA
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

ETA

Rated Operational Voltage

24V dc

Series

X222.611

Pitch

59.5mm

For Use With

ESX10-T

Land van herkomst:
DE

ESX10-T Electronic Circuit Protectors


Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current to 1.3 to 1.8 times the selected rated current of the circuit protector. It is therefore possible to switch on capacitive loads of up to 20,000μF, but they are disconnected only in the event of an overload or short circuit.

Selective load protection, electronic trip characteristics
Reliable overload disconnection with 1.1 x lN plus, even with long load lines or small cable cross sections
Manual ON/OFF button (S1)
Status and failure indication through LED, status output SF or Si contact F
Integral fail-safe element adjusted to current rating
Can be snapped onto symmetrical rails for ease of installation and space-saving in control cabinets
Ease of wiring through busbar LINE+ and 0 V as well as signal bars and bridges

Approvals

UL, CSA

Approvals

UL, CSA

Gerelateerde Links