RS PRO Heat Shrink Cable Marker, Yellow, 1.8 → 4.1mm Cable
- RS-stocknr.:
- 872-6230
- Fabrikant:
- RS PRO
Subtotaal (1 doos van 1000 eenheden)*
€ 144,75
(excl. BTW)
€ 175,15
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 21 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 16 stuk(s) vanaf 26 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Dozen | Per Doos | Per stuk* |
|---|---|---|
| 1 + | € 144,75 | € 0,145 |
*prijsindicatie
- RS-stocknr.:
- 872-6230
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Affixing Method | Heat Shrink | |
| Minimum Cable Diameter | 1.8mm | |
| Cable Diameter Range | 1.8 → 4.1mm | |
| Maximum Cable Diameter | 4.1mm | |
| Colour | Yellow | |
| Width | 4.8 mm | |
| Quantity | 1000 | |
| Material | Polyolefin | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | +125°C | |
| Fire Behaviour | Flame Retardant | |
| Resistant To | Abrasion, Chemicals | |
| Operating Temperature Range | -55 → +125 °C | |
| Standards Met | cULus, RoHS Compliant | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Affixing Method Heat Shrink | ||
Minimum Cable Diameter 1.8mm | ||
Cable Diameter Range 1.8 → 4.1mm | ||
Maximum Cable Diameter 4.1mm | ||
Colour Yellow | ||
Width 4.8 mm | ||
Quantity 1000 | ||
Material Polyolefin | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature +125°C | ||
Fire Behaviour Flame Retardant | ||
Resistant To Abrasion, Chemicals | ||
Operating Temperature Range -55 → +125 °C | ||
Standards Met cULus, RoHS Compliant | ||
- Land van herkomst:
- CN
RS PRO Heat Shrink Cable Marker, Yellow, 1.8 mm to 4.1 mm Diameter Range
These blank cable marker sleeves from RS PRO allow you to label electrical wires before they're put to use. You can use a laser printer to mark multiple labels and then affix them to your cables using a heat gun.
The sleeves are made of high-quality, flame retardant polyolefin, meaning they won't easily catch fire if there's an electrical fault. The cable markers are also pre-cut, so you can easily tear them off as needed.
Heat shrink sleeves of this type are suitable for use in workshops and factories thanks to their good chemical and abrasion resistance. They're rated UL 224 by Underwriters Laboratories, meaning they're safe to use in electrical wiring insulation.
Features and Benefits
Gerelateerde Links
- RS PRO Heat Shrink Cable Marker 1.8 → 4.1mm Cable
- RS PRO Heat Shrink Cable Marker 1.8 → 4.1mm Cable
- RS PRO Heat Shrink Cable Marker 7 → 16.3mm Cable
- RS PRO Heat Shrink Cable Marker 2.3 → 5.5mm Cable
- RS PRO Heat Shrink Cable Marker 1.1 → 2.7mm Cable
- RS PRO Heat Shrink Cable Marker 3.5 → 8mm Cable
- HellermannTyton 554 Heat Shrink Heat Shrink Cable Marker 2.4 → 4.8mm Cable, 554-51201 TLFX48YE-PO-X-YE
- Brady R4300 Heat Shrink Heat Shrink Cable Marker 3.1 → 8.1mm Cable, M21-375-C-342-YL