Igus 15 Black, W26mm x D24 mm, L1000.00 mm, 38 mm Min. Bend Radius, Igumid GLW
- RS-stocknr.:
- 185-2801
- Fabrikantnummer:
- 15.015.038.0
- Fabrikant:
- Igus
Subtotaal (1 eenheid)*
€ 53,88
(excl. BTW)
€ 65,19
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 11 stuk(s) klaar voor verzending
- 44 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 53,88 |
*prijsindicatie
- RS-stocknr.:
- 185-2801
- Fabrikantnummer:
- 15.015.038.0
- Fabrikant:
- Igus
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Igus | |
| Width | 26mm | |
| Product Type | Cable Trunking | |
| Depth | 24mm | |
| Colour | Black | |
| Material | Igumid GLW | |
| Length | 1m | |
| Minimum Bend Radius | 38mm | |
| Fire Behaviour | Flame Retardant, Self-Extinguishing | |
| Series | 15 | |
| Integrated Strain Relief | Yes | |
| Standards/Approvals | REACH, RoHS | |
| Alles selecteren | ||
|---|---|---|
Merk Igus | ||
Width 26mm | ||
Product Type Cable Trunking | ||
Depth 24mm | ||
Colour Black | ||
Material Igumid GLW | ||
Length 1m | ||
Minimum Bend Radius 38mm | ||
Fire Behaviour Flame Retardant, Self-Extinguishing | ||
Series 15 | ||
Integrated Strain Relief Yes | ||
Standards/Approvals REACH, RoHS | ||
- Land van herkomst:
- DE
Igus igubal Series Pillow Block Bearing, 10mm Inside Diameter, 14mm Centre Height - KSTM-10
This pillow block bearing provides mounted shaft support for motion systems in automation, electronics and mechanical installations. It combines a low-mass bearing element made from Igumid G with a compact housing profile to offer smooth rotation for 10mm shafts where a small footprint and straightforward fixing are required.
Features and Benefits:
• Static load capacity 1500N for predictable support under radial loads
• Two-bolt fixing for simple secure attachment
• Mount hole centre-to-centre 46mm for accurate alignment
• Mount hole size 5.5 x 8mm to accept common fasteners
• Centre height 14mm to match standard shaft offset requirements
• Length 62mm and height 26mm for constrained-space assemblies
• Two-bolt fixing for simple secure attachment
• Mount hole centre-to-centre 46mm for accurate alignment
• Mount hole size 5.5 x 8mm to accept common fasteners
• Centre height 14mm to match standard shaft offset requirements
• Length 62mm and height 26mm for constrained-space assemblies
Applications
• Suitable for lightweight conveyor and guide systems in automation
• Ideal for small actuator and gearbox mounting in mechanical builds
• Used for rotating shafts in electronic test rigs and fixtures
• Can be used for bearing support in CNC accessory modules
• Ideal for small actuator and gearbox mounting in mechanical builds
• Used for rotating shafts in electronic test rigs and fixtures
• Can be used for bearing support in CNC accessory modules
What shaft diameters does it accept?
It is sized for a 10mm internal bore to accommodate 10mm shafts directly.
What material is the bearing element made from and why is that relevant?
The sliding element is formed from Igumid G, a polymer that reduces assembly mass and provides low-friction operation in applications sensitive to weight.
How does the housing aid installation accuracy?
The fixed bolt centres of 46mm ensure repeatable positioning when mounting multiple units or replacing parts.
What mounting fasteners are compatible with the holes provided?
The oblong mount holes measure 5.5 x 8 mm, allowing clearance for common M5 or M6 fasteners depending on head type and assembly requirements.