Microchip MCP2542FD-E/SN, CAN Transceiver 8 Mbps, 8-Pin SOIC

RS-stocknr.:: 177-1939
Artikelnummer Distrelec:: 304-38-536
Fabrikantnummer:: MCP2542FD-E/SN
Fabrikant:: Microchip

Microchip MCP2542FD-E/SN, CAN Transceiver 8 Mbps, 8-Pin SOIC

Bulkkorting beschikbaar

Subtotaal (1 verpakking van 20 eenheden)*

€ 18,08

(excl. BTW)

€ 21,88

(incl. BTW)

Voeg 100 eenheden toe voor gratis bezorging

Bestellingen onder € 75,00 (excl. BTW) € 5,95.

Op voorraad

Plus verzending 420 stuk(s) vanaf 16 februari 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
20 - 20	€ 0,904	€ 18,08
40 - 80	€ 0,87	€ 17,40
100 +	€ 0,831	€ 16,62

*prijsindicatie

RS-stocknr.:: 177-1939
Artikelnummer Distrelec:: 304-38-536
Fabrikantnummer:: MCP2542FD-E/SN
Fabrikant:: Microchip

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Microchip
	Maximum Data Rate	8Mbps
	Product Type	CAN Transceiver
	Number of Transceivers	1
	Sub Type	CAN Transceiver
	Power Down Mode	Standby, Normal
	Supply Current	70mA
	Mount Type	Surface
	Interface Type	ISO 11898-2, ISO 11898-5, CAN
	Package Type	SOIC
	Pin Count	8
	Minimum Supply Voltage	4.5V
	Maximum Supply Voltage	5.5V
	ESD Protection	Yes
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	125°C
	Height	1.5mm
	Length	4.9mm
	Standards/Approvals	No
	Series	MCP2542FD
	Width	3.9 mm
	Automotive Standard	AEC-Q100

	Alles selecteren
	Merk Microchip
	Maximum Data Rate 8Mbps
	Product Type CAN Transceiver
	Number of Transceivers 1
	Sub Type CAN Transceiver
	Power Down Mode Standby, Normal
	Supply Current 70mA
	Mount Type Surface
	Interface Type ISO 11898-2, ISO 11898-5, CAN
	Package Type SOIC
	Pin Count 8
	Minimum Supply Voltage 4.5V
	Maximum Supply Voltage 5.5V
	ESD Protection Yes
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 125°C
	Height 1.5mm
	Length 4.9mm
	Standards/Approvals No
	Series MCP2542FD
	Width 3.9 mm
	Automotive Standard AEC-Q100

Datasheet

Land van herkomst:: US

The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, low quiescent current,electromagnetic compatibility (EMC) and electrostatic discharge (ESD).

Supports CAN 2.0 and CAN with Flexible Data Rate CAN FD) Physical Layer Transceiver Requirements

Optimized for CAN FD at 2, 5 and 8 Mbps Operation

Maximum propagation delay: 120 ns

Loop delay symmetry: ±10% (2 Mbps)

Wake-up on CAN activity, 3.6 μs filter time

Very Low Standby Current (4 μA, typical)

VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5V I/O

CAN Bus Pins are Disconnected when Device is Unpowered

An unpowered node or brown-out event will not load the CAN bus

Device is unpowered if VDD or VIO drop below its POR level

Detection of

Microchip MCP2542FD-E/SN, CAN Transceiver 8 Mbps, 8-Pin SOIC

Voeg 100 eenheden toe voor gratis bezorging

Gerelateerde Links