Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Microchip
	Product Type	CAN Transceiver
	Maximum Data Rate	1Mbps
	Number of Transceivers	1
	Sub Type	CAN Transceiver
	Power Down Mode	High Speed, Standby, Slope Control
	Supply Current	75mA
	Mount Type	Through Hole
	Interface Type	ISO 11898
	Package Type	PDIP
	Pin Count	8
	Minimum Supply Voltage	4.5V
	Maximum Supply Voltage	5.5V
	ESD Protection	Yes
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	125°C
	Standards/Approvals	No
	Series	MCP2551
	Height	4.83mm
	Length	10.16mm
	Width	7.11 mm
	Automotive Standard	No

	Alles selecteren
	Merk Microchip
	Product Type CAN Transceiver
	Maximum Data Rate 1Mbps
	Number of Transceivers 1
	Sub Type CAN Transceiver
	Power Down Mode High Speed, Standby, Slope Control
	Supply Current 75mA
	Mount Type Through Hole
	Interface Type ISO 11898
	Package Type PDIP
	Pin Count 8
	Minimum Supply Voltage 4.5V
	Maximum Supply Voltage 5.5V
	ESD Protection Yes
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 125°C
	Standards/Approvals No
	Series MCP2551
	Height 4.83mm
	Length 10.16mm
	Width 7.11 mm
	Automotive Standard No

Datasheet

Land van herkomst:: TH

The MCP2551 is a high-speed CAN transceiver, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO-11898 standard, including 24V requirements. It will operate at speeds of up to 1 Mb/s.

Slope control input

Supports 1 Mb/s operation

Suitable for 12V and 24V systems

Externally-controlled slope for reduced RFIemissions

Permanent dominant detect

Low current standby operation

High noise immunity due to differential busimplementation

Microchip MCP2551-E/P, CAN Transceiver 1 Mbps, 8-Pin PDIP

Gerelateerde Links