Microchip MCP25625T-E/ML, CAN Controller 1 Mbps, 28-Pin QFN
- RS-stocknr.:
- 177-3171
- Fabrikantnummer:
- MCP25625T-E/ML
- Fabrikant:
- Microchip
Subtotaal (1 verpakking van 5 eenheden)*
€ 14,82
(excl. BTW)
€ 17,93
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 2.630 stuk(s) vanaf 16 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 5 + | € 2,964 | € 14,82 |
*prijsindicatie
- RS-stocknr.:
- 177-3171
- Fabrikantnummer:
- MCP25625T-E/ML
- Fabrikant:
- Microchip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Microchip | |
| Product Type | CAN Controller | |
| Maximum Data Rate | 1Mbps | |
| Number of Transceivers | 1 | |
| Sub Type | CAN Controller | |
| Power Down Mode | Standby, Sleep | |
| Supply Current | 10mA | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Interface Type | CAN 2.0B | |
| Pin Count | 28 | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| ESD Protection | Yes | |
| Maximum Operating Temperature | 125°C | |
| Width | 6 mm | |
| Length | 6mm | |
| Standards/Approvals | No | |
| Series | MCP25625 | |
| Height | 0.92mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Microchip | ||
Product Type CAN Controller | ||
Maximum Data Rate 1Mbps | ||
Number of Transceivers 1 | ||
Sub Type CAN Controller | ||
Power Down Mode Standby, Sleep | ||
Supply Current 10mA | ||
Mount Type Surface | ||
Package Type QFN | ||
Interface Type CAN 2.0B | ||
Pin Count 28 | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
ESD Protection Yes | ||
Maximum Operating Temperature 125°C | ||
Width 6 mm | ||
Length 6mm | ||
Standards/Approvals No | ||
Series MCP25625 | ||
Height 0.92mm | ||
Automotive Standard No | ||
The MCP25625 is a complete, cost-effective and small-footprint CAN solution that can be easily added to a microcontroller with an available SPI interface. The MCP25625 interfaces directly with microcontrollers operating at 2.7V to 5.5V, there are no external level shifters required. In addition, the MCP25625 connects directly to the physical CAN bus, supporting all requirements for CAN high-speed transceivers.
Stand-Alone CAN2.0B Controller with Integrated CAN Transceiver and Serial Peripheral Interface (SPI)
Up to 1 Mb/s Operation
Very Low Standby Current (10 μA, typical).
Up to 10 MHz SPI Clock Speed
Interfaces Directly with Microcontrollers with 2.7V to 5.5V I/O
Available in SSOP-28L and 6x6 QFN-28L
Temperature Ranges:
Extended (E): -40°C to +125°C