Sefram MW3950B Clamp Meter 60 A ac 600 V dc 600 V ac 600 V CAT III Non-Contact Voltage Detector

RS-stocknr.:: 217-5202
Fabrikantnummer:: MW3950B
Fabrikant:: Sefram

Sefram MW3950B Clamp Meter 60 A ac 600 V dc 600 V ac 600 V CAT III Non-Contact Voltage Detector

Momenteel niet beschikbaar

We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.

RS-stocknr.:: 217-5202
Fabrikantnummer:: MW3950B
Fabrikant:: Sefram

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Sefram
	Product Type	Clamp Meter
	Resistance Resolution	0.1Ω
	Maximum AC Voltage Measurement	600V ac
	Maximum DC Voltage Measurement	600V dc
	Model Number	MW3950B
	DC Voltage Resolution	100 mV dc
	Resistance Measurement Accuracy	±1 % + 3 Digits
	DC Voltage Accuracy	±7 % rdg + 2 Digits
	AC Current Accuracy	±1.9 % rdg + 5 Digits
	Minimum Operating Temperature	0°C
	AC Voltage Accuracy	±1 % rdg + 5 Digits
	AC Voltage Resolution	100mV ac
	AC Current Resolution	100mA
	Maximum Jaw Opening	58mm
	Clamp Meter Type	Leakage Clamp Meter
	Maximum Operating Temperature	50°C
	Width	250mm
	Weight	500g
	Length	90mm
	Height	50mm
	Standards/Approvals	RoHS
	Functions Measured	AC Voltage, DC Voltage, AC Current
	True RMS	Yes
	Safety Category Level	600 V CAT III
	Non-Contact Voltage Detector	Yes
	Power Source	Battery
	Maximum Conductor Size	40mm
	Battery Type	AAA
	Maximum AC Current Measurement	60A ac
	Display Type	LCD
	Battery Life	300h

	Alles selecteren
	Merk Sefram
	Product Type Clamp Meter
	Resistance Resolution 0.1Ω
	Maximum AC Voltage Measurement 600V ac
	Maximum DC Voltage Measurement 600V dc
	Model Number MW3950B
	DC Voltage Resolution 100 mV dc
	Resistance Measurement Accuracy ±1 % + 3 Digits
	DC Voltage Accuracy ±7 % rdg + 2 Digits
	AC Current Accuracy ±1.9 % rdg + 5 Digits
	Minimum Operating Temperature 0°C
	AC Voltage Accuracy ±1 % rdg + 5 Digits
	AC Voltage Resolution 100mV ac
	AC Current Resolution 100mA
	Maximum Jaw Opening 58mm
	Clamp Meter Type Leakage Clamp Meter
	Maximum Operating Temperature 50°C
	Width 250mm
	Weight 500g
	Length 90mm
	Height 50mm
	Standards/Approvals RoHS
	Functions Measured AC Voltage, DC Voltage, AC Current
	True RMS Yes
	Safety Category Level 600 V CAT III
	Non-Contact Voltage Detector Yes
	Power Source Battery
	Maximum Conductor Size 40mm
	Battery Type AAA
	Maximum AC Current Measurement 60A ac
	Display Type LCD
	Battery Life 300h

Datasheet - MW3950B

Land van herkomst:: TW

The Sefram MW3950B is the ideal tool for measuring leakage currents. Measure the leakage currents present on the earth, determine the leakage in a cable by positioning the clamp directly around a cable (without the earth wire), also measure currents up to 60A AC with a resolution of 1μA.with its Bluetooth interface and its application

dedicated to tablets or smartphones (Android or IOS), you can monitor your measurements and record them in real time. Then export the data via

the tablet or the smartphone in .csv file in order to be able to process them in a spreadsheet software. By comparing one transmitting end and the corresponding receiving end, the SEFRAM 96 also can test installed cable far away by using the receiving unit.

The tester provides the variety for wiring check, such as cable continuity, open status, short status and miss-wired.

LCD 6000 counts with backlight

Current measurement up to 60A AC

Minimum resolution : 1μA

Low pass filter

Maximum Jaw Opening : 42mm

High Frequency Rejection (selectable : 50Hz, 60Hz & 1kHz)

True RMS reading

Manual and Automatic range

Max, Min and HOLD functions

Bluetooth interface to save reading values

Torch light

Sefram MW3950B Clamp Meter 60 A ac 600 V dc 600 V ac 600 V CAT III Non-Contact Voltage Detector

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen