RS PRO Clearance Gauge, 0.03 mm min, 0.18 mm max
- RS-stocknr.:
- 222-4444
- Fabrikant:
- RS PRO
Subtotaal (1 doos van 10 eenheden)*
€ 7,95
(excl. BTW)
€ 9,62
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 37 stuk(s) klaar voor verzending
- 653 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Dozen | Per Doos | Per stuk* |
|---|---|---|
| 1 + | € 7,95 | € 0,795 |
*prijsindicatie
- RS-stocknr.:
- 222-4444
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Maximum Measurement | 0.18 mm | |
| Product Type | Clearance Gauge | |
| Minimum Measurement | 0.03 mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Maximum Measurement 0.18 mm | ||
Product Type Clearance Gauge | ||
Minimum Measurement 0.03 mm | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- GB
RS PRO Clearance Gauge, 0.025 mm → 0.175 mm
This clearance gauge provides an easy but accurate way to measure the clearance space between hidden surfaces. It's particularly useful for measuring the clearance in split bearings or in situations where feeler gauges can't be inserted.
Also known as plastigauge, this strip of soft material can be sandwiched between the bearing surface on a shaft and the bearing shell. When you tighten the bearing cap, the plastigauge is flattened and you can then figure out the clearance by comparing the flattened plastigauge to the supplied calibration card.
This clearance gauge is used to measure distances ranging from 0.025 mm to 0.175 mm. These gauges from the RS PRO range have been thoroughly tested for reliability. They're ideal for applications such as measuring the clearance in pipe-flanges, head gaskets, injection moulding tools and cylinder heads.
Features and Benefits
• Clearance gauge
• Minimum measurement of 0.025 mm
• Maximum measurement of 0.175 mm
• Calibration card supplied
• Non-corrosive
• Oil-soluble
• To be certain of accuracy, you should take particular care when measuring clearances below 0.06 mm
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Gerelateerde Links
- RS PRO Clearance Gauge 0.5 mm max
- RS PRO Clearance Gauge 0.25 mm max
- Clearance Gauges
- Sanyo Denki San Ace 40 9P Series Fan 0.18 m³/min 0.28 A Max 15 mm 40mm 40 mm
- RS PRO Vernier Height Gauge, max. measurement 600 mm
- RS PRO Vernier Height Gauge, max. measurement 300 mm
- RS PRO Digital Height Gauge, max. measurement 300 mm
- RS PRO Digital Height Gauge, max. measurement 600 mm