Renesas Electronics 501MILFT Clock Buffer 8-Pin SOIC

Bekijk alle Clock Buffers
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
Verpakkingsopties
RS-stocknr.:
217-7828
Fabrikantnummer:
501MILFT
Fabrikant:
Renesas Electronics
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Renesas Electronics

Product Type

Clock Buffer

Maximum Input Frequency

50MHz

Mount Type

Surface

Package Type

SOIC

Pin Count

8

Number of Outputs

5

Minimum Supply Voltage

3.3V

Maximum Supply Voltage

5V

Minimum Operating Temperature

0°C

Maximum Operating Temperature

70°C

Standards/Approvals

No

Length

5mm

Series

501MILFT

Height

1.75mm

Width

4 mm

Automotive Standard

No

The Renesas Electronics 501 Loco™ is the most cost effective way to generate a high-quality, high-frequency clock output from a lower frequency crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 160 MHz. Stored in the chip's ROM is the ability to generate nine different multiplication factors, allowing one chip to output many common frequencies (see table on page 2). The device also has an output enable pin which tri-states the clock output when the OE pin is taken low.

IDT's lowest cost PLL clock

Zero ppm multiplication error

Input crystal frequency of 5 - 27 MHz

Input clock frequency of 2 - 50 MHz

Output clock frequencies up to 160 MHz

Extremely low jitter of 25 ps (one sigma)

Compatible with all popular CPUs

Duty cycle of 45/55 up to 160 MHz

Gerelateerde Links