Renesas Electronics 5L1503L-000NVGI Clock Generator, 10-Pin 3 VFQFPN
- RS-stocknr.:
- 248-6230
- Fabrikantnummer:
- 5L1503L-000NVGI
- Fabrikant:
- Renesas Electronics
Bulkkorting beschikbaar
Subtotaal (1 rol van 100 eenheden)*
€ 103,00
(excl. BTW)
€ 125,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 100 stuk(s) vanaf 19 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 100 - 100 | € 1,03 | € 103,00 |
| 200 - 400 | € 0,959 | € 95,90 |
| 500 - 900 | € 0,852 | € 85,20 |
| 1000 - 2400 | € 0,678 | € 67,80 |
| 2500 + | € 0,655 | € 65,50 |
*prijsindicatie
- RS-stocknr.:
- 248-6230
- Fabrikantnummer:
- 5L1503L-000NVGI
- Fabrikant:
- Renesas Electronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Renesas Electronics | |
| Product Type | Clock Generator | |
| Mount Type | Surface | |
| Package Type | VFQFPN | |
| Minimum Supply Voltage | 1.71V | |
| Pin Count | 10 | |
| Maximum Supply Voltage | 1.89V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Series | 5L1503 | |
| Standards/Approvals | No | |
| Height | 0.5mm | |
| Width | 2.05 mm | |
| Length | 2.05mm | |
| Maximum Output Frequency | 100MHz | |
| Automotive Standard | No | |
| Number of Outputs | 3 | |
| Alles selecteren | ||
|---|---|---|
Merk Renesas Electronics | ||
Product Type Clock Generator | ||
Mount Type Surface | ||
Package Type VFQFPN | ||
Minimum Supply Voltage 1.71V | ||
Pin Count 10 | ||
Maximum Supply Voltage 1.89V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Series 5L1503 | ||
Standards/Approvals No | ||
Height 0.5mm | ||
Width 2.05 mm | ||
Length 2.05mm | ||
Maximum Output Frequency 100MHz | ||
Automotive Standard No | ||
Number of Outputs 3 | ||
The Renesas Electronics microclock programmable ultra low power clock generator intended to use for low-power, consumer, battery powered applications, wearable and smart devices. The device is a 1 PLL + DCO architecture design with an external fundamental crystal or clock input.
Proactive Power Saving (PPS) features save power during the end device power down mode
Dynamic Frequency Control (DFC) feature allows programming up to 2 difference configuration that switch dynamically
OTP programming