ADAFRUIT INDUSTRIES FONA MiniGSM uFL SIM800 Mobile Communication Module 1.9 GHz 1946
- RS-stocknr.:
- 124-5474
- Fabrikantnummer:
- 1946
- Fabrikant:
- ADAFRUIT INDUSTRIES
Subtotaal (1 eenheid)*
€ 42,38
(excl. BTW)
€ 51,28
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 42,38 |
*prijsindicatie
- RS-stocknr.:
- 124-5474
- Fabrikantnummer:
- 1946
- Fabrikant:
- ADAFRUIT INDUSTRIES
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ADAFRUIT INDUSTRIES | |
| Product Type | Communication & Wireless Development Tool | |
| RF Technology | Mobile Communication | |
| Kit Classification | Module | |
| Featured Device | SIM800 | |
| Kit Name | FONA MiniGSM uFL | |
| Maximum Frequency | 1.9GHz | |
| Interface Type | UART | |
| Standards/Approvals | RoHS | |
| Alles selecteren | ||
|---|---|---|
Merk ADAFRUIT INDUSTRIES | ||
Product Type Communication & Wireless Development Tool | ||
RF Technology Mobile Communication | ||
Kit Classification Module | ||
Featured Device SIM800 | ||
Kit Name FONA MiniGSM uFL | ||
Maximum Frequency 1.9GHz | ||
Interface Type UART | ||
Standards/Approvals RoHS | ||
Adafruit FONA - Mini Mobile Communications (Cellular) GSM Modules
The Adafruit FONA MiniGSM is an all-in-one mobile phone (cellular) module that enables you to add voice, text, SMS and data to your project. Measuring just 4.45 x 3.18 mm (1.75"x1.25") it packs a surprising amount of technology into such a small module. It features the latest SIM800 GSM cellular module.
Available with a choice of two connectors:
Adafruit 1963 - Mobile Communication Module with SMA connector (RS 124-5475)
Adafruit 1946 - Mobile Communication Module with uFL connector (RS 124-5474)
- Quad-band 850/900/1800/1900MHz
- Send and receive SMS messages
- Send and receive GPRS data (TCP/IP, HTTP)
- Make and receive voice calls using a headset via the oboard headphone socket or an external 8 Ω speaker and electret microphone.
- Scan and receive FM radio broadcasts
- PWM/Buzzer vibrational motor control (motor not included)
- AT command interface with "auto baud" detection
- Onboard LiPo battery charging circuitry enables you to recharge over micro-USB. LiPo or Li-ion battery with at least 500 mAh is recommended but not included. Two indicator LEDs show charge status.
- Level shifting circuitry so you can run it with 2.8 V to 5 V logic.
- SMA or uFL connection for external antenna (depending on version)
- Indicator LEDs for power and network connectivity
- Standard SIM card slides into the socket on the back
Recommended Accessories
SIM Card
LiPo Battery – 500 mAh or larger (RS 791-6460)
Micro USB cable for battery charging (RS 121-3251)
External Antenna - SMA (RS 793-4376), uFL (704-3417)
TRRS 4-Pole Headset - Any 'iPhone' or 'Android' compatible (but not iPhone original) or external electret mic and 8 Ω speaker
Vibrating motor
Mobile Communication (Cellular) Modules - Adafruit
Note
This module requires a microcontroller to drive it. An Arduino board is recommended but any 3 to 5 V microcontroller with a UART can send and receive commands over the RX/TX pins.
Gerelateerde Links
- Adafruit FONA MiniGSM SMA SIM800 Mobile Communication (Cellular) Module 1963
- ADAFRUIT INDUSTRIES FONA 3G GSM 3G cellular Breakout Cellular Breakout Board 1.9 GHz 2691
- ADAFRUIT INDUSTRIES 2479 Adafruit Wireless Development Kit
- ADAFRUIT INDUSTRIES
- ADAFRUIT INDUSTRIES Adafruit Music Maker MP3 Shield
- ADAFRUIT INDUSTRIES Adafruit PN532 NFC/RFID Controller Shield
- ADAFRUIT INDUSTRIES FeatherWing Latching Relay for Adafruit Feather
- ADAFRUIT INDUSTRIES FeatherWing Non-Latching Relay for Adafruit Feather