STMicroelectronics Discovery CMWX1ZZABZ-091 LoRa Development Kit for LoRaWAN 915 MHz B-L072Z-LRWAN1

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 43,57

(excl. BTW)

€ 52,72

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Laatste voorraad RS
  • 5 resterend, klaar voor verzending
  • Laatste verzending 17 stuk(s) vanaf 18 maart 2026
Aantal stuks
Per stuk
1 +€ 43,57

*prijsindicatie

RS-stocknr.:
134-5557
Artikelnummer Distrelec:
303-97-137
Fabrikantnummer:
B-L072Z-LRWAN1
Fabrikant:
STMicroelectronics
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

STMicroelectronics

Product Type

Communication & Wireless Development Tool

Kit Classification

Development Kit

RF Technology

LoRa

Technology

LoRa, Ultra-low-Power STM32L0

For Use With

LoRaWAN

Featured Device

CMWX1ZZABZ-091

Kit Name

Discovery

Maximum Frequency

915MHz

Interface Type

SWD, USB

Standards/Approvals

No

STMicroelectronics Development Kit


The STMicroelectronics development kit is an RF discovery kit featuring the CMWX1ZZABZ-091 LoRa module from Murata. This module incorporates the SX1276 low-power transceiver, which features a long-range modem. This module supports high performance and OOK/FSK modulations. The transceiver is controlled by a STM32L072CZY6 microcontroller embedded in the module. This kit provides support for bi-directional end devices in class A and class C protocols and for end device activation, either via Over-The-Air Activation (OTAA) or via Activation-By-Personalization (ABP).

Features and Benefits


Frequency ranges between 860MHz and 930MHz

USB 2.0 FS

4-channel, 12-bit ADC, 2 x DAC

6-bit timers, LP-UART, I2C and SPI

Embedded SX1276 transceiver

14 dBm or +20 dBm selectable output power

157dB maximum link budget

Programmable bit rate up to 300kbit/s

High sensitivity: down to -137dBm

89dB blocking immunity

Fully integrated synthesizer with a resolution of 61Hz

Built-in bit synchronizer for clock recovery

Sync word recognition

Preamble detection

Board power supply through the USB bus or external VIN/3.3V supply voltage or batteries

3 x AAA-type battery holder for standalone operation

Fault-power LED

Applications


Wireless communication

Embedded systems

Certifications


ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

Gerelateerde Links