Terasic SDI to HSMC SDI HSMC Board Adapter Board for Stratix IV GX FPGA Development Board P0039

Bekijk deze categorie
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 578,02

(excl. BTW)

€ 699,40

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks
Per stuk
1 - 1€ 578,02
2 +€ 563,57

*prijsindicatie

RS-stocknr.:
768-9035
Fabrikantnummer:
P0039
Fabrikant:
Terasic
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Terasic

Product Type

Communication & Wireless Development Tool

Kit Classification

Adapter Board

For Use With

Stratix IV GX FPGA Development Board

Featured Device

SDI HSMC Board

Kit Name

SDI to HSMC

Interface Type

HSMC

Standards/Approvals

AES3, SDI

Terasic SDI HSMC Board


The Transceiver Serial Digital Interface (SDI) HSMC board provides a hardware platform for developing video broadcasting systems. It is intended to be used by customers to implement and design SDI and AES systems based on transceiver-based host boards with an HSMC interface. It can also be part of an openly sold Development Kit, or bundled with packages of software and IP cores.

2 x SDI transmit (TX) channels with SDI cable tri-speed drivers

2 x SDI receive (RX) channels with SDI cable equalizers

2 x 75Ω BNC SDI TX interfaces

2 x 75Ω BNC SDI RX interfaces

Adjustable 1.1 to 1.8V and standard 3.3V CMOS Input Signal Levels

2 x RS-422 transceivers for AES3 TX and AES3 RX channels

2 x 75Ω BNC AES3 RX interfaces

2 x 75Ω BNC AES3 TX interfaces

High frequency switching regulator for 12V to 5V power supply conversion

3 x linear regulators for 5V to 3.3V low noise power supply conversion

FDTIM analysis for power distribution network (PDN) decoupling

SDI multi-frequency VCXO femto clock video PLL

98.304MHz / 90.3168MHz / 122.88MHz / 112.896MHz voltage-controlled crystal oscillator (VCXO) based phase-locked loop (PLL)

LVPECL differential clock buffer with two differential outputs - HSMC and SMA

4 x digital audio isolation transformers

Multi-format video sync separator

HSMC connector for interface conversion, fully compatible with HSMC host boards

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Supplied with

System CD ROM

Gerelateerde Links