RS PRO LCR Meter Tweezer

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PRO LCR 1707 Smart Tweezer LCR Tester

The RS PRO LCR 1707 are great value smart tweezers. This device is like a pair of tweezers but has an LCR meter attached, designed for surface mount components. You use them by putting the components between the tips of the tweezers and it will automatically measure the component on the display.

This component tester offers basic parameters L, C, R, D, Q, Ɵ, EsR and testing frequency 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz.

The RS PRO LCR 1707 is ideal to perform on board measurements and troubleshoot loose components These smart tweezers have some great features including data hold mode, zeroing mode, parallel/serial test mode, self calibration mode, external DC power operation and USB interface making them a must have device for anyone testing components.

Features and Benefits:

  • 20 000 count digital display

  • Auto selection of LCR testing, auto ranging

  • 0.2% basic accuracy capacitance and inductance

  • Low battery and overload indication

  • Auto Power Off (approximately 10 minutes)

  • Tweezers easy testing

  • Convenient one hand operation

  • Lightweight and portable

  • Ideal for use in electronics

  • No test leads to get in your way

  • USB interface

  • 3.7 V / 400 mAh Li-ion Battery

  • Dimensions 38 x 168 x 23 mm (without holster)

  • Weight 70 g (with holster)

Typical Applications

Component & IC Testers are devices used to test ICs (Integrated Circuits) and SMD (Service Mounting Devices) and measure a range of electrical parameters such as voltage, resistance, capacitance, diode, continuity and more. Component & IC testing devices are available in a range of devices, many of which are portable hand held devices. These testers are commonly used in applications such as:

  • Production

  • Trouble shooting – sort and test loose components

  • Maintenance

Why RS PRO?
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO seal of approval if were confident of their exceptional quality, which means you can be confident too.

Note

Power requirement is Li-ion 400 mAh battery or Ext. DC 5 V mini-USB plug

Supplied with

Li-ion battery (installed), flat tip probe, bend tip probe, AC adapter, USB cable, software (on CD-ROM), user manual, carrying case

5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
45 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
222,00
(excl. BTW)
268,62
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 222,00
Related Products
Ideal-tek ST-LED is a specialised solution for testing ...
Description:
Ideal-tek ST-LED is a specialised solution for testing and verifying SMD and through-hole LEDs. Its design combines a pair of high quality gold-plated tweezers and a digital adaptive LED tester in a compact, lightweight, battery-powered instrument. Convenient one-hand operationInstrument of ...
The Peak component and IC tester component is ...
Description:
The Peak component and IC tester component is an intelligent component analyser. It is 20mm high, 70mm wide and 103mm long. The DCA55 tester can analyse a vast number of different component types including bipolar transistors, MOSFETs, thyristors, triacs, diodes, ...
The Atlas SCR will identify the device type, ...
Description:
The Atlas SCR will identify the device type, display the pinout and measure gate sensitivity. Connect any way roundThyristor and Triac identificationAutomatic pinout identificationGate sensitivity checking from 100uA to 90mALoad current test up to 100mAShorted junction testingAuto power on and ...
LEAPER-1A is a portable IC Tester that is ...
Description:
LEAPER-1A is a portable IC Tester that is designed for digital ICs. No PC is required to operate LEAPER-1A, it works complete in a stand-alone mode through power adaptor or batteries. Easy-operating, particularly designed for the digital ICsSupport low voltage ...