PMA, 20 mm Nominal Diameter, Plastic, Black
- RS-stocknr.:
- 314-8672
- Fabrikantnummer:
- PECO-17B
- Fabrikant:
- PMA
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 73,03
(excl. BTW)
€ 88,37
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 73,03 |
| 10 - 49 | € 69,38 |
| 50 + | € 65,73 |
*prijsindicatie
- RS-stocknr.:
- 314-8672
- Fabrikantnummer:
- PECO-17B
- Fabrikant:
- PMA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | PMA | |
| Product Type | Conduit | |
| Nominal Diameter | 20mm | |
| Material | Plastic | |
| Series | PECO | |
| Colour | Black | |
| Length | 10m | |
| IP Rating | IP66 | |
| Minimum Operating Temperature | -40°C | |
| Resistance Features | Oil Resistant, Alkali Resistant, Lubricant Resistant, Fuel Resistant | |
| Maximum Operating Temperature | 105°C | |
| Standards/Approvals | No | |
| Hazardous Area Certification | No | |
| Minimum Bend Radius | 40mm | |
| Alles selecteren | ||
|---|---|---|
Merk PMA | ||
Product Type Conduit | ||
Nominal Diameter 20mm | ||
Material Plastic | ||
Series PECO | ||
Colour Black | ||
Length 10m | ||
IP Rating IP66 | ||
Minimum Operating Temperature -40°C | ||
Resistance Features Oil Resistant, Alkali Resistant, Lubricant Resistant, Fuel Resistant | ||
Maximum Operating Temperature 105°C | ||
Standards/Approvals No | ||
Hazardous Area Certification No | ||
Minimum Bend Radius 40mm | ||
- Land van herkomst:
- CH
ABB PECO Series Conduit, 20mm Nominal Diameter, 10m Length - PECO-17B
This conduit provides a protective plastic channel for routing cables in demanding industrial settings. It is supplied as a 10m roll in a black finish and is intended for use where protection against oils, fuels and alkalis is required, while maintaining flexibility over a wide temperature range.
Features & Benefits
• Rated IP66 for dust-tight and heavy spray protection
• Withstands temperatures from -40°C to 105°C for varied climates
• Nominal 20mm bore supports common cable sizes efficiently
• Oil, fuel and lubricant resistance reduces maintenance needs
• Minimum bend radius 40mm enables tight routing without damage
• Plastic construction offers chemical resistance with low weight
• Withstands temperatures from -40°C to 105°C for varied climates
• Nominal 20mm bore supports common cable sizes efficiently
• Oil, fuel and lubricant resistance reduces maintenance needs
• Minimum bend radius 40mm enables tight routing without damage
• Plastic construction offers chemical resistance with low weight
**Applications**
• Suitable for cable runs on automation control cabinets
• Ideal for wiring in electronics manufacturing plants
• Used for conduit protection in electrical distribution systems
• Can be used for routing cables in mechanical plant rooms
• Suitable for installations requiring resistance to oils and fuels
• Ideal for wiring in electronics manufacturing plants
• Used for conduit protection in electrical distribution systems
• Can be used for routing cables in mechanical plant rooms
• Suitable for installations requiring resistance to oils and fuels
How does the product behave in corrosive cleaning environments?
Its polymer composition resists alkalis, limiting degradation when exposed to alkaline detergents.
Can it endure outdoor exposure to heavy spray?
The IP66 rating confirms protection from powerful water jets and complete ingress prevention of dust.
What installation flexibility does it offer around machinery?
The 40mm minimum bend radius allows tight bends for confined installations without compromising cable integrity.
How does the material perform near hot equipment?
It sustains continuous operation at temperatures up to 105°C, suitable for proximity to heat sources.