PMA, 32 mm Nominal Diameter, Plastic, Grey
- RS-stocknr.:
- 445-9888
- Fabrikantnummer:
- LL-29S
- Fabrikant:
- PMA
Afbeelding representeert productcategorie
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 445-9888
- Fabrikantnummer:
- LL-29S
- Fabrikant:
- PMA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | PMA | |
| Product Type | Conduit | |
| Nominal Diameter | 32mm | |
| Material | Plastic | |
| Series | LL | |
| Colour | Grey | |
| Length | 10m | |
| IP Rating | IP68, IP54, IP66 | |
| Thread Size | M32 | |
| Minimum Operating Temperature | -20°C | |
| Resistance Features | Acid Resistant | |
| Maximum Operating Temperature | 90°C | |
| Standards/Approvals | UL, EU | |
| Hazardous Area Certification | ATEX | |
| Minimum Bend Radius | 55mm | |
| Alles selecteren | ||
|---|---|---|
Merk PMA | ||
Product Type Conduit | ||
Nominal Diameter 32mm | ||
Material Plastic | ||
Series LL | ||
Colour Grey | ||
Length 10m | ||
IP Rating IP68, IP54, IP66 | ||
Thread Size M32 | ||
Minimum Operating Temperature -20°C | ||
Resistance Features Acid Resistant | ||
Maximum Operating Temperature 90°C | ||
Standards/Approvals UL, EU | ||
Hazardous Area Certification ATEX | ||
Minimum Bend Radius 55mm | ||
- Land van herkomst:
- CH
ABB Series LL Conduit, 32mm Nominal Diameter, Grey - LL-29S
This conduit provides flexible cable protection for industrial installations, designed for use in machinery, apparatus and general installation work. Manufactured from modified polypropylene, it offers a light-wall construction suited to pre-assembly and simple fitting in automated and electrical systems.
Features & Benefits
• Operates across temperatures from -20°C to 90°C for broad environments
• Resistant to strong acids to protect cable jackets in corrosive areas
• Minimum bend radius 55mm enables tight routing in confined spaces
• IP68 IP66 IP54 ratings allow deployment in wet and dusty conditions
• Compatible with M32 threaded fittings for secure terminations
• Resistant to strong acids to protect cable jackets in corrosive areas
• Minimum bend radius 55mm enables tight routing in confined spaces
• IP68 IP66 IP54 ratings allow deployment in wet and dusty conditions
• Compatible with M32 threaded fittings for secure terminations
**Applications**
• Suitable for cable routing within machine frames and control cabinets
• Ideal for installations requiring acid-resistant routing in plants
• Used with conduit glands and PMAFIX accessories in automation systems
• Can be used for fixed wiring runs in harsh factory environments
• Ideal for installations requiring acid-resistant routing in plants
• Used with conduit glands and PMAFIX accessories in automation systems
• Can be used for fixed wiring runs in harsh factory environments
What material properties influence its insulating behaviour?
It is produced from specially modified polypropylene with a density around 0.90–0.92 g/cm3, giving very good electrical insulation and impact resistance.
How does it perform under repeated flexing?
The conduit withstands over 100,000 reverse bending cycles in standard tests, demonstrating long-term cyclic flexibility for moving or reconfigured assemblies.
Which approvals and test methods back its use in industrial settings?
It has been assessed against applicable EN/IEC and UL test criteria, with specific PMA test methods used for impact and pull-out performance.
What mechanical loads can connectors resist?
Pull-out resistance for conduit-to-connector assemblies exceeds 100 N under the referenced test procedure, supporting secure terminations during handling.