Schneider Electric Acti9 Contactor, 230V ac Coil, 2-Pole, 25 A, 3 W 230V ac, 2 NO, 250V ac

RS-stocknr.:: 191-6069
Fabrikantnummer:: A9C15187
Fabrikant:: Schneider Electric

Schneider Electric Acti9 Contactor, 230V ac Coil, 2-Pole, 25 A, 3 W 230V ac, 2 NO, 250V ac

Subtotaal (1 eenheid)*

€ 67,34

(excl. BTW)

€ 81,48

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 1 stuk(s) vanaf 31 augustus 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 67,34

*prijsindicatie

RS-stocknr.:: 191-6069
Fabrikantnummer:: A9C15187
Fabrikant:: Schneider Electric

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Schneider Electric
	Product Type	Contactor
	Coil Voltage	230V ac
	Number of Poles	2
	Contact Voltage	250V ac
	Contact Current	25A
	Power Rating	3W
	Series	Acti9
	Function	Control Circuit
	Mount Type	DIN Rail
	Normal State Configuration	2 NO
	Number of Auxiliary Contacts	888
	Terminal Type	Cable
	Minimum Operating Temperature	-5°C
	Control Circuit Voltage Uc	230V ac
	Operational Current Ie	25A
	Contactor Application	Control Circuit
	Maximum Operating Temperature	60°C
	Length	18mm
	Standards/Approvals	EN/IEC
	Depth	87mm
	Width	66mm
	Pole and Throw Configuration	2

	Alles selecteren
	Merk Schneider Electric
	Product Type Contactor
	Coil Voltage 230V ac
	Number of Poles 2
	Contact Voltage 250V ac
	Contact Current 25A
	Power Rating 3W
	Series Acti9
	Function Control Circuit
	Mount Type DIN Rail
	Normal State Configuration 2 NO
	Number of Auxiliary Contacts 888
	Terminal Type Cable
	Minimum Operating Temperature -5°C
	Control Circuit Voltage Uc 230V ac
	Operational Current Ie 25A
	Contactor Application Control Circuit
	Maximum Operating Temperature 60°C
	Length 18mm
	Standards/Approvals EN/IEC
	Depth 87mm
	Width 66mm
	Pole and Throw Configuration 2

Land van herkomst:: FR

Schneider Electric Acti 9 iCT Contactors

ACTi 9 iCT Contactors from Schneider Electric provides power switching in single phase 3 phase loads. TeSys GC is a range of contactors that are safe, simple to use, and easy to install. The devices are compact in size and suitable for use in a wide variety of applications.

Features and Benefits

• Built-in auxiliary contacts for added switching capability

• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings

• Can be panel mounted with screws or DIN Rail mounted

• Impulse relay function

• Day-night function

• Class-2 insulation: continuous safety for operators and unqualified personnel

What is the difference between AC-7a and AC-7b when choosing a iCT contactor?

These utilization catagories determine what load the contactors are switching:

AC-7a are for slightly inductive loads for household appliances for example mixers and blenders

AC-7b are for motor-loads for house hold appliances such as fans and central vacuums

Do spacers have to be fitted between the iCT range of Contactors?

If several contactors are fitted onto an DIN Rail then spacers should be used after every second contactor. The reason for this is that with multiple contactors side by side there can be a very high build of heat causing the devices to reach above their operating temperature. The coils themselves are 100% rated so can be on for 24 hours a day and the heat needs to be dissipated, therefore a spacer is required