Siemens INSTA Contactor, 220V ac Coil, 4-Pole, 25 A, 2.2 W 230V, 4 NO, 400V

This contactor is an installation device designed to switch and reverse 4 independent circuits in safety-orientated industrial environments. It is actuated by an AC Coil with an alternative DC actuation rating and is built for continuous duty. The unit provides protection to the control circuit and integrates into modular assemblies where heat-dissipation spacing is provided.

• 25A contact current for switching moderate loads
• 400V contact voltage for use with common AC systems
• 230V UC control circuit for seamless control integration
• 100% duty-cycle Coil for continuous operation
• 2.2W Coil power limiting thermal dissipation per pole

• Suitable for reversing motor control in machinery panels
• Used for safety switching in industrial automation systems
• Ideal for installations requiring four separate NO contacts
• Compatible with control systems using 230V control circuits

It provides four normally open contacts arranged across four poles.

Install spacers as specified to ensure adequate heat dissipation around the device.

The enclosure meets IP20 protection for Basic protection against solid objects.

The Coil accepts AC actuation and has a DC-rated actuation Value of 220V.

Allow for a height of 90 mm, width of 35 mm and a depth of 71 mm when planning panel space.