Eaton DILM Contactor, 110V ac Coil, 4-Pole, 45 A, 11 kW 110V ac, 4 NO, 400V ac
- RS-stocknr.:
- 743-4977
- Fabrikantnummer:
- 109819 DILMP45-10(110V50HZ,120V60HZ)
- Fabrikant:
- Eaton
Subtotaal (1 eenheid)*
€ 90,83
(excl. BTW)
€ 109,90
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 4 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 90,83 |
*prijsindicatie
- RS-stocknr.:
- 743-4977
- Fabrikantnummer:
- 109819 DILMP45-10(110V50HZ,120V60HZ)
- Fabrikant:
- Eaton
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Eaton | |
| Coil Voltage | 110V ac | |
| Product Type | Contactor | |
| Number of Poles | 4 | |
| Contact Voltage | 400V ac | |
| Contact Current | 45A | |
| Power Rating | 11kW | |
| Series | DILM | |
| Mount Type | DIN Rail | |
| Function | Motor Control, Resistive Load | |
| Normal State Configuration | 4 NO | |
| Auxiliary Contact Configuration | 1 NO | |
| Number of Auxiliary Contacts | 1 | |
| Terminal Type | Screw Clamp | |
| Minimum Operating Temperature | -25°C | |
| Control Circuit Voltage Uc | 110V ac | |
| Contactor Application | Motor Control | |
| Operational Current Ie | 45A | |
| Maximum Operating Temperature | 60°C | |
| Length | 85mm | |
| Depth | 138mm | |
| Width | 58mm | |
| Standards/Approvals | EN 60947 | |
| Pole and Throw Configuration | 4 | |
| Alles selecteren | ||
|---|---|---|
Merk Eaton | ||
Coil Voltage 110V ac | ||
Product Type Contactor | ||
Number of Poles 4 | ||
Contact Voltage 400V ac | ||
Contact Current 45A | ||
Power Rating 11kW | ||
Series DILM | ||
Mount Type DIN Rail | ||
Function Motor Control, Resistive Load | ||
Normal State Configuration 4 NO | ||
Auxiliary Contact Configuration 1 NO | ||
Number of Auxiliary Contacts 1 | ||
Terminal Type Screw Clamp | ||
Minimum Operating Temperature -25°C | ||
Control Circuit Voltage Uc 110V ac | ||
Contactor Application Motor Control | ||
Operational Current Ie 45A | ||
Maximum Operating Temperature 60°C | ||
Length 85mm | ||
Depth 138mm | ||
Width 58mm | ||
Standards/Approvals EN 60947 | ||
Pole and Throw Configuration 4 | ||
EATON Single Phase DILM Series Contactors
Eaton's products offer over 100 years of experience in starting, controlling and protecting motors. This generation of modular contactors are part of a proven product portfolio that benefit from the advances in technology for motor switching and control, which in turn gives the user a number of additional benefits whilst helping you use energy in a more reliable, efficient, safe and sustainable way.
Specifically designed for very high currents the DILM series of power contacts are able to deal with current ranges from 185 A to 2,600 A. Built with electronically controlled drives, high operational reliability and a long lifespan these compact contactors make a trusted addition to any machine and system, ensuring continual operation for busy environments. DILM contactors also handle all demands when used in conjunction with PLCs.
As standard, the range coils are equipped with an integrated suppressor circuit and 2NO/2NC auxiliary contacts.
DILM 580 A - 1400 A Contactors
These power contactors use vacuum technology which enables them to stay compact in size. The technology prevents the formation of open arcs and therefore the release of any switching gases allowing a tighter arrangement of the switchgear and smaller distances to the conductive structures.
Features and Benefits
• Compatible with the SmartWire-DT® communication system
• Identical sizes for AC and DC operated contactors
• Minimised heat dissipation - energy saving
• Direct Fieldbus connection
• Integrated suppressor circuit for DC models
• Suitable for up to 1,000 V
• AC/DC wide-range coil
• Low holding power
• Utilisation category AC 1 and AC 3
• Features immunity to interference and control circuit reliability even when used in conjunction with PLC's
Typical Applications
This range of contactors can be used across a multitude of applications, users will commonly find these contactors being used within industrial settings such as factory automation, railway transportation, electrical systems, electric motor, lighting, and mechanical engineering.
How contactors operate?
Contactors, unlike relays, are specifically designed to connect to high current load devices. Used in larger-scale applications, a contactor is a switch that can be controlled remotely, specifically designed to switch a large amount of electrical power through its contacts. If a device has the ability to switch more than 15 amperes it is called a contactor. These devices also feature high coil voltages which is rare within relays.
Note
Eaton formerly known as Moeller
Standards
IEC/EN 60947, VDE 0660, UL, CSA
Gerelateerde Links
- Eaton DILM Contactor 4-Pole 14 kW, 1 NO
- Eaton DILM Contactor 3-Pole 45 kW 110V ac 400V ac
- Eaton DILM Contactor 4-Pole 5.5 kW 110V ac 400V ac
- Eaton DILM Contactor 4-Pole 18.5 kW 110V ac 400V ac
- Eaton DILM Contactor 4-Pole 22 kW 110V ac 400V ac
- Eaton DILM Contactor 230 V ac/dc Coil 45 A, 90 kW
- Eaton DILM Contactor 3-Pole 4 kW 110V ac 400V ac
- Eaton DILM Contactor 3-Pole 11 kW 110V ac 400V ac