Schneider Electric TeSyS D Contactor, 110V ac Coil, 3-Pole, 150 A, 80 kW 110V ac, 3 NO, 1kV ac

Bekijk alle Contactors

Subtotaal (1 eenheid)*

€ 631,54

(excl. BTW)

€ 764,16

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 2 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 631,54

*prijsindicatie

RS-stocknr.:
744-7241
Fabrikantnummer:
LC1D1506F7
Fabrikant:
Schneider Electric
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Schneider Electric

Coil Voltage

110V ac

Product Type

Contactor

Number of Poles

3

Contact Voltage

1kV ac

Contact Current

150A

Series

TeSyS D

Power Rating

80kW

Function

Motor Control, Resistive Load

Mount Type

DIN Rail

Normal State Configuration

3 NO

Auxiliary Contact Configuration

1 NO/1 NC

Number of Auxiliary Contacts

2

Terminal Type

Lug Ring

Minimum Operating Temperature

-40°C

Control Circuit Voltage Uc

110V ac

Operational Current Ie

150A

Contactor Application

Motor Control, Resistive Load

Maximum Operating Temperature

60°C

Width

120mm

Length

158mm

Standards/Approvals

CSA, UL

Depth

136mm

Pole and Throw Configuration

3P

Schneider Electric Contactor, 8kV Impulse Withstand Voltage, 1.4kA Rated Breaking Capacity - LC1D Series - LC1D1506F7


For safe control of your high-power equipment, turn to this contactor from Schneider Electric. It falls into the AC-1, AC-4 and AC-3 utilisation categories, making it a versatile unit that you can use to switch squirrel cage motors and non-inductive loads. The unit's power rating of 100kW shows that it's fit for heavy-duty applications. For safe signal transmission, it comes with a suppressor module to quell transient voltages. The device is designed for DIN rail mounting, so you don't need complex installation tools to set it up.

Features & Benefits


• Mechanical durability of 8 million cycles assures you of long-lasting service

• Compact dimensions of 158 (H) x 120 (W) x 136 (D) make it a good fit for setups with limited space

• Withstands up to 8kV of impulse voltage without suffering damage, so it's suitable for applications that are prone to power spikes

Applications


• Lifts and escalators

• Agricultural equipment

• Mechanic's workshops

Is this contactor flame-resistant?


Yes, the unit stops burning in 30 seconds or less in the event of a fire, helping to limit the spread of flames.

Schneider Electric LC1D TeSys D Contactors.


TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits.


  • Built-in auxiliary contacts for added switching capability.

  • Screw connections: IP20 finger-safe terminals with both North American and International terminal markings.

  • Can be panel mounted with screws or DIN Rail mounted.

  • Bidirectional peak limiting diode suppressor to protect the coil.

  • Easily installed accessories.

  • Flexible control circuit to suit a wide range of applications.

    • What does the utilisation category AC1 and AC3 mean for the TeSys contactors?


  • Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

  • AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.

  • AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

    • What accessories are available?


  • Auxiliary contact blocks with serrated wiping action.

  • Front mount dust tight auxiliary contact blocks.

  • Pneumatic time delay blocks.

  • Transient voltage surge suppressors.

  • Interface modules and electronic timers.

  • Mechanical latching blocks.

    • Is the TeSys D range a double break pole type contactor?


  • Yes, the Tesys D range uses linear translation movement that provides double breaking of the poles.

    • Gerelateerde Links