Schneider Electric Acti9 iCT Contactor, 48V Coil, 2-Pole, 16 A, 1.3 W 48V, 2 NO, 250V ac

RS-stocknr.:: 776-2985
Fabrikantnummer:: A9C22212
Fabrikant:: Schneider Electric

Schneider Electric Acti9 iCT Contactor, 48V Coil, 2-Pole, 16 A, 1.3 W 48V, 2 NO, 250V ac

Subtotaal (1 eenheid)*

€ 67,50

(excl. BTW)

€ 81,68

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 02 juli 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 67,50

*prijsindicatie

RS-stocknr.:: 776-2985
Fabrikantnummer:: A9C22212
Fabrikant:: Schneider Electric

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Schneider Electric
	Product Type	Contactor
	Coil Voltage	48V
	Number of Poles	2
	Contact Voltage	250V ac
	Contact Current	16A
	Series	Acti9 iCT
	Power Rating	1.3W
	Mount Type	DIN Rail
	Function	Motor Control
	Normal State Configuration	2 NO
	Terminal Type	Screw
	Control Circuit Voltage Uc	48V
	Operational Current Ie	16A
	Minimum Operating Temperature	-5°C
	Contactor Application	Motor Control
	Maximum Operating Temperature	60°C
	Width	60mm
	Standards/Approvals	EN 61095, IEC 1095, NF
	Length	81mm
	Depth	18mm
	Pole and Throw Configuration	2

	Alles selecteren
	Merk Schneider Electric
	Product Type Contactor
	Coil Voltage 48V
	Number of Poles 2
	Contact Voltage 250V ac
	Contact Current 16A
	Series Acti9 iCT
	Power Rating 1.3W
	Mount Type DIN Rail
	Function Motor Control
	Normal State Configuration 2 NO
	Terminal Type Screw
	Control Circuit Voltage Uc 48V
	Operational Current Ie 16A
	Minimum Operating Temperature -5°C
	Contactor Application Motor Control
	Maximum Operating Temperature 60°C
	Width 60mm
	Standards/Approvals EN 61095, IEC 1095, NF
	Length 81mm
	Depth 18mm
	Pole and Throw Configuration 2

Land van herkomst:: FR

Schneider Electric Acti 9 iCT Contactors

ACTi 9 iCT Contactors from Schneider Electric provides power switching in single phase 3 phase loads. TeSys GC is a range of contactors that are safe, simple to use, and easy to install. The devices are compact in size and suitable for use in a wide variety of applications.

Features and Benefits

• Built-in auxiliary contacts for added switching capability

• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings

• Can be panel mounted with screws or DIN Rail mounted

• Impulse relay function

• Day-night function

• Class-2 insulation: continuous safety for operators and unqualified personnel

What is the difference between AC-7a and AC-7b when choosing a iCT contactor?

These utilization catagories determine what load the contactors are switching:

AC-7a are for slightly inductive loads for household appliances for example mixers and blenders

AC-7b are for motor-loads for house hold appliances such as fans and central vacuums

Do spacers have to be fitted between the iCT range of Contactors?

If several contactors are fitted onto an DIN Rail then spacers should be used after every second contactor. The reason for this is that with multiple contactors side by side there can be a very high build of heat causing the devices to reach above their operating temperature. The coils themselves are 100% rated so can be on for 24 hours a day and the heat needs to be dissipated, therefore a spacer is required