Schneider Electric Spring Return Enclosed Push Button - 1 NO/1 NC, Polycarbonate, 2 Cutouts, Green, Red, I/O, IP69K,

RS-stocknr.:: 330-8509
Artikelnummer Distrelec:: 135-12-362
Fabrikantnummer:: XALD213
Fabrikant:: Schneider Electric

Schneider Electric Spring Return Enclosed Push Button - 1 NO/1 NC, Polycarbonate, 2 Cutouts, Green, Red, I/O, IP69K,

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 42,65

(excl. BTW)

€ 51,61

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

193 stuk(s) klaar voor verzending
38 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 9	€ 42,65
10 +	€ 36,25

*prijsindicatie

RS-stocknr.:: 330-8509
Artikelnummer Distrelec:: 135-12-362
Fabrikantnummer:: XALD213
Fabrikant:: Schneider Electric

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Schneider Electric
	Series	XALD
	Product Type	Enclosed Push Button
	Number of Cutouts	2
	Push Button Marking	I/O
	Push Button Colour	Green, Red
	Push Button Material	Polycarbonate
	Enclosure Colour	Grey
	Contact Configuration	1 NO/1 NC
	Enclosure Material	Polycarbonate
	IP Rating	IP69K, IP66, IP67
	Cutout Diameter	22mm
	Minimum Operating Temperature	-40°C
	Push Button Actuation	Spring Return
	Length	68mm
	Maximum Operating Temperature	70°C
	Standards/Approvals	UL, CSA
	Width	68mm
	Hazardous Area Certification	No
	Depth	53mm
	Terminal Type	Screw

	Alles selecteren
	Merk Schneider Electric
	Series XALD
	Product Type Enclosed Push Button
	Number of Cutouts 2
	Push Button Marking I/O
	Push Button Colour Green, Red
	Push Button Material Polycarbonate
	Enclosure Colour Grey
	Contact Configuration 1 NO/1 NC
	Enclosure Material Polycarbonate
	IP Rating IP69K, IP66, IP67
	Cutout Diameter 22mm
	Minimum Operating Temperature -40°C
	Push Button Actuation Spring Return
	Length 68mm
	Maximum Operating Temperature 70°C
	Standards/Approvals UL, CSA
	Width 68mm
	Hazardous Area Certification No
	Depth 53mm
	Terminal Type Screw

Vrijgesteld

Land van herkomst:: FR

Schneider Electric Enclosed Push Button, Screw Clamp Terminal Type, 2 x Flush Button Actuators - Harmony XALD Series - XALD213

Need a reliable way to quickly stop and start your industrial equipment? Get your hands on this enclosed push button from Schneider Electric. Pressing on the green actuator causes the contacts to close and set connected machinery in motion. Simply push the red button to turn it off again. Universally recognised 'on' and 'off' symbols are clearly printed in white to make sure no one gets their wires crossed. Impulse voltages are no trouble for this unit, which withstands surges up to 6kV. Its low weight of 233g puts minimal strain on the mounting surface.

Features & Benefits

• Withstands harsh environments thanks to a wide operating temperature range between -40°C and +70°C

• 0.8 to 1.2Nm tightening torque means it's a breeze to install by hand

• Impact-resistant polycarbonate body holds up in tough conditions

• IP66 rating means it's dust-tight and withstands high-pressure water jets from any direction, so safe to wash down

Applications

• Lifting systems

• Rolling shutters

• Packaging equipment

How long will this control station last?

It has a durability rating of 10 million cycles, so you can trust it to handle constant use.

Start/Stop, I/O Double/Triple Switches

Green and red 22mm diameter, spring return double insulated bezel push buttons

Stop button fitted with 1 N/C contact block, start button fitted with 1 N/O contact

I/O with red LED pilot light available

’STOP’ ’START’; version has marking on legend holder and legend below head

Double insulated

IP65 rated

Polycarbonate construction

Dimensions 106x68x62mm (incl button) (Double)