Hengstler 886 Counter, Counter, 5 Digit, 25 Hz 24V dc
- RS-stocknr.:
- 260-757
- Fabrikantnummer:
- 0 886 264
- Fabrikant:
- Hengstler
Subtotaal (1 eenheid)*
€ 256,20
(excl. BTW)
€ 310,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 3 stuk(s) klaar voor verzending
- 4 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 6 stuk(s) vanaf 09 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 256,20 |
*prijsindicatie
- RS-stocknr.:
- 260-757
- Fabrikantnummer:
- 0 886 264
- Fabrikant:
- Hengstler
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Hengstler | |
| Product Type | Counter | |
| Count Mode | Impulse | |
| Function | Counter | |
| Connection Type | Cable | |
| Number of Digits | 5 | |
| Mount Type | Panel Mount | |
| Maximum Supply Voltage | 24V dc | |
| Digit Height | 4mm | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 50°C | |
| Maximum Count Frequency | 25Hz | |
| Standards/Approvals | No | |
| Series | 886 | |
| Alles selecteren | ||
|---|---|---|
Merk Hengstler | ||
Product Type Counter | ||
Count Mode Impulse | ||
Function Counter | ||
Connection Type Cable | ||
Number of Digits 5 | ||
Mount Type Panel Mount | ||
Maximum Supply Voltage 24V dc | ||
Digit Height 4mm | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 50°C | ||
Maximum Count Frequency 25Hz | ||
Standards/Approvals No | ||
Series 886 | ||
- Land van herkomst:
- DE



Predetermining Batch Counter - 5 Digit
Used for counting electrical impulses up to a pre-set value which is continuously displayed below the count value, enabling comparisons to be made
Isolated SPDT micro switch changes over when the counter reaches the preselected count value. Change over contact rated to 220Vac 20VA
Contacts return to original position when counter is reset to zero (manual or electrical versions available)
Pre-set value is interlocked to prevent accidental change and can be changed when counting is in progress
