onsemi MC74HC393A, Counter 6V
- RS-stocknr.:
- 186-9089
- Fabrikantnummer:
- MC74HC393ADG
- Fabrikant:
- onsemi
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 tube van 55 eenheden)*
€ 15,235
(excl. BTW)
€ 18,425
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 55 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per tube* |
|---|---|---|
| 55 - 55 | € 0,277 | € 15,24 |
| 110 - 495 | € 0,22 | € 12,10 |
| 550 - 990 | € 0,174 | € 9,57 |
| 1045 - 2475 | € 0,165 | € 9,08 |
| 2530 + | € 0,161 | € 8,86 |
*prijsindicatie
- RS-stocknr.:
- 186-9089
- Fabrikantnummer:
- MC74HC393ADG
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Product Type | Counter | |
| Reset Method | Asynchronous | |
| Mount Type | Surface | |
| Maximum Supply Voltage | 6V | |
| Count Direction | Uni-Directional | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | RoHS | |
| Series | MC74HC393A | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Product Type Counter | ||
Reset Method Asynchronous | ||
Mount Type Surface | ||
Maximum Supply Voltage 6V | ||
Count Direction Uni-Directional | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals RoHS | ||
Series MC74HC393A | ||
High-Performance Silicon-Gate CMOS The MC74HC393A is identical in pinout to the LS393. The device inputs are compatible with standard CMOS outputs, with pullup resistors,they are compatible with LSTTL outputs. This device consists of two independent 4-bit binary ripple counters with parallel outputs from each counter stage. A divide-by 256 counter can be obtained by cascading the two binary counters. Internal flip-flops are triggered by high-to-low transitions of the clock input. Reset for the counters is asynchronous and active-high. State changes of the Q outputs do not occur simultaneously because of internal ripple delays. Therefore, decoded output signals are subject to decoding spikes and should not be used as clocks or as strobes except when gated with the Clock of the HC393A.
Output Drive Capability: 10 LSTTL Loads
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2 to 6 V
Low Input Current: 1 mA
High Noise Immunity Characteristic of CMOS Devices
Chip Complexity: 236 FETs or 59 Equivalent Gates