Kubler K 07.90 Counter, Counter, 7 Digit, 25 Hz 24V dc
- RS-stocknr.:
- 297-3045
- Fabrikantnummer:
- 1.130.900.033
- Fabrikant:
- Kubler
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 26,08
(excl. BTW)
€ 31,56
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 80,00
Op voorraad
- Plus verzending 6 stuk(s) vanaf 30 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 26,08 |
*prijsindicatie
- RS-stocknr.:
- 297-3045
- Fabrikantnummer:
- 1.130.900.033
- Fabrikant:
- Kubler
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Kubler | |
| Product Type | Counter | |
| Function | Counter | |
| Connection Type | Solder Pin | |
| Reset Method | No Reset | |
| Number of Digits | 7 | |
| Direction of Rotation | Up | |
| Mount Type | PCB | |
| Count Direction | Up | |
| Maximum Supply Voltage | 24V dc | |
| Digit Height | 4mm | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 60°C | |
| Depth | 32.7mm | |
| Maximum Count Frequency | 25Hz | |
| Standards/Approvals | No | |
| Weight | 18g | |
| Cutout Width | 30mm | |
| Cutout Height | 13mm | |
| Meter Type | Electromechanical | |
| Series | K 07.90 | |
| Alles selecteren | ||
|---|---|---|
Merk Kubler | ||
Product Type Counter | ||
Function Counter | ||
Connection Type Solder Pin | ||
Reset Method No Reset | ||
Number of Digits 7 | ||
Direction of Rotation Up | ||
Mount Type PCB | ||
Count Direction Up | ||
Maximum Supply Voltage 24V dc | ||
Digit Height 4mm | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 60°C | ||
Depth 32.7mm | ||
Maximum Count Frequency 25Hz | ||
Standards/Approvals No | ||
Weight 18g | ||
Cutout Width 30mm | ||
Cutout Height 13mm | ||
Meter Type Electromechanical | ||
Series K 07.90 | ||
- Land van herkomst:
- DE
Non Reset Totalising Counters
Magnifying lens increases readout to 4mm
Retains count during power failure
Unaffected by shock, vibration or magnetic fields
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.