Knipex 0.5 to 6 mm² Crimp Tool Crimp Tool for D Sub HDE Contacts, D Sub HD 20 Contacts

RS-stocknr.:: 305-324
Artikelnummer Distrelec:: 110-83-908
Fabrikantnummer:: 97 54 24
Fabrikant:: Knipex

Knipex 0.5 to 6 mm² Crimp Tool Crimp Tool for D Sub HDE Contacts, D Sub HD 20 Contacts

Subtotaal (1 eenheid)*

€ 376,84

(excl. BTW)

€ 455,98

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Op voorraad

Plus verzending 4 stuk(s) vanaf 23 februari 2026
Plus verzending 4 stuk(s) vanaf 23 februari 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 376,84

*prijsindicatie

RS-stocknr.:: 305-324
Artikelnummer Distrelec:: 110-83-908
Fabrikantnummer:: 97 54 24
Fabrikant:: Knipex

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Knipex
	Sub Type	Crimp Tool
	Product Type	Crimp Tool
	Handle Type	Comfort Grip
	For Use With	D Sub HDE Contacts, D Sub HD 20 Contacts
	Cutting Capacity	0.5 to 6 mm²
	Height Safe	No
	Overall Length	190mm
	Standards/Approvals	REACH contains SVHC
	Maximum Wire Size AWG	20
	Minimum Wire Size AWG	32
	Minimum Wire Size mm²	0.03
	Maximum Wire Size mm²	0.56

	Alles selecteren
	Merk Knipex
	Sub Type Crimp Tool
	Product Type Crimp Tool
	Handle Type Comfort Grip
	For Use With D Sub HDE Contacts, D Sub HD 20 Contacts
	Cutting Capacity 0.5 to 6 mm²
	Height Safe No
	Overall Length 190mm
	Standards/Approvals REACH contains SVHC
	Maximum Wire Size AWG 20
	Minimum Wire Size AWG 32
	Minimum Wire Size mm² 0.03
	Maximum Wire Size mm² 0.56

Datasheet - 97 54 24

Land van herkomst:: DE

Micro-connector crimping pliers with parallel crimping

Features and benefits

- Parallel crimping motion, to meet the particularly stringent requirements of micro-connectors

- Amplified force due to toggle gearing for less tiring work

- High-quality repeat crimping thanks to the integrated lock (automatic release mechanism)

- Crimping pressure precisely defined (calibrated) at the factory, also adjustable

- Optimum force transmission through lever for fatigue-reducing operation

- Low weight

- Compact design

- Ergonomic handles

- Capacities mm² / AWG : for D-Sub; HD 20; HDE micro connectors - Connectors from 0.03 to 0.56 mm² - AWG 32 to 20

- Material: Special grade chrome vanadium electrical steel, oil quenched

Typical applications

Crimping pliers can be used in many applications:

- Maintenance and repair

- Electrical installations

- Crimp shop

Product Maintenance

- To maintain proper operation and long service life, the shafts and other moving parts should be lubricated regularly.

- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.

- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

*Use a light non-mineral oil