Knipex Twistor 16 Crimp Tool for Wire Ferrules

Bekijk alle Crimp Tools

Subtotaal (1 eenheid)*

€ 237,06

(excl. BTW)

€ 286,84

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Bestellingen onder € 75,00 (excl. BTW) € 5,95.
Op voorraad
  • 4 stuk(s) klaar voor verzending
  • 6 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 237,06

*prijsindicatie

RS-stocknr.:
176-4188
Artikelnummer Distrelec:
301-16-795
Fabrikantnummer:
97 53 18
Fabrikant:
Knipex

Niet conform

Land van herkomst:
DE

Automatic crimping pliers for wire end ferrules from 0.08 to 16mm² with 360° rotating head


The Knipex 16 Series Cable Crimper for end sleeves has a square crimp profile and high cable crimping capacity. It has a 360° rotating crimping die, with 8 tactile locking positions and has a high crimping quality. It is self-adjusting so there is no risk of crimping errors due to using the wrong crimping die or setting.

Features and Benefits


- 360° rotating crimping head with 8 engagement positions

- Square crimp profile, crimping range

- Crimping of wire end ferrules possible in almost any working position

- Crimping tool automatically adjusts to the individual sections

- Crimp opening accessible from both sides, end sleeves can be moved

- Crimping of twin end sleeves up to 2 x 6 mm² is possible

- Crimp quality is always high thanks to the forced locking (can be unlocked)

- Lightweight and handy tool, hand force reduced by lever mechanisms

- Compact design

- Ergonomic handles

- Slim head for ideal accessibility

- Capacities mm² / AWG : from 0.14 to 16 mm², AWG from 28 to 5

- Material: special grade chrome vanadium electric steel, oil-hardened

Typical applications


Crimping pliers can be used in many applications:

- Maintenance and repair

- Electrical installations

- Crimp shop

Product Maintenance


- To maintain proper operation and long service life, the shafts and other moving parts should be lubricated regularly.

- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.

- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

*Use a light non-mineral oil

Gerelateerde Links