Gossen Metrawatt Current Clamp, 1 kA AC Max, AC Output

RS-stocknr.:: 263-6769
Artikelnummer Distrelec:: 301-47-460
Fabrikantnummer:: Z194A
Fabrikant:: Gossen Metrawatt

Gossen Metrawatt Current Clamp, 1 kA AC Max, AC Output

Afbeelding representeert productcategorie

Subtotaal (1 eenheid)*

€ 51,51

(excl. BTW)

€ 62,33

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 1 stuk(s) vanaf 09 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 51,51

*prijsindicatie

RS-stocknr.:: 263-6769
Artikelnummer Distrelec:: 301-47-460
Fabrikantnummer:: Z194A
Fabrikant:: Gossen Metrawatt

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Gossen Metrawatt
	Product Type	Current Clamp
	Maximum AC Current	1kA
	Maximum Conductor Size	43mm
	Cable Length	1.5m
	Output Type	AC
	Connector Type	4 mm Safety Plug
	Standards/Approvals	EN 610101, VDE 04701, IEC 610101, IEC 61326/EN 61326, VDE 04111, EN 60529, EN 610102032
	Safety Category Voltage	600V
	Safety Category Level	CAT III

	Alles selecteren
	Merk Gossen Metrawatt
	Product Type Current Clamp
	Maximum AC Current 1kA
	Maximum Conductor Size 43mm
	Cable Length 1.5m
	Output Type AC
	Connector Type 4 mm Safety Plug
	Standards/Approvals EN 610101, VDE 04701, IEC 610101, IEC 61326/EN 61326, VDE 04111, EN 60529, EN 610102032
	Safety Category Voltage 600V
	Safety Category Level CAT III

Land van herkomst:: IN

Gossen-Metrawatt Current Clamp, 1000A Maximum AC Current, 43mm Maximum Conductor Size - Z194A

This current clamp is an AC measurement probe designed for industrial and maintenance environments, providing non-intrusive current sensing for live conductors. It permits high-capacity AC measurement within systems rated for CAT III applications and is intended for use where robust safety standards and standardised approvals are required.

Features and Benefits:

• 1000 A measurement capacity enabling high-ampere readings
• CAT III safety rating supporting installation-level testing
• 600 V safety voltage allowing use on medium-voltage circuits
• 4 mm safety plug for secure connection to test instruments
• 1.5 m cable length permitting flexible positioning during measurement

Applications

• Suitable for on-site electrical maintenance and troubleshooting
• Ideal for load monitoring in distribution panels
• Used with portable meters for commissioning tasks
• Can be used for diagnostics on industrial switchgear
• Suitable for measuring conductors up to 43 mm diameter

Which standards and approvals apply to this unit?

It conforms to EN 61010, IEC 61010, VDE 04701, IEC 61326/EN 61326, VDE 04111 and EN 60529.

What protection level does it offer against dust and water?

The product meets IP-rating requirements as defined in EN 60529 for environmental ingress protection.

What connector type is provided for instrument interfacing?

A 4 mm safety plug is fitted for connection to compatible test equipment.

What conductor diameter can be accommodated within the jaw?

The jaw accepts conductors up to 43 mm in diameter.

Is the clamp suitable for typical CAT III measurement scenarios?

It is specified for CAT III use at 600 V for installation-level measurements.