Tektronix TCP0030A Oscilloscope Probe, Probe Type: Current 120MHz

  • RS-stocknr. 781-0807
  • Fabrikantnummer TCP0030A
  • Fabrikant Tektronix
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: CN
Productomschrijving

Tektronix TCP Series

The Tektronix TCP300 Series of split-core current probes incorporates transformer and Hall effect technology. The TCP300 models TCP303 (796-2683 ), TCP305A ( 781-0810 ) and TCP312A ( 781-0801 ) are used with amplifier TCPA300 ( 764-4391 ), available separately, to provide high performance capability from low level milliamp measurements to the measurement of very high current levels. The TCP0030A ( 781-0807 ) is powered directly by oscilloscopes with the TekVPI interface.

Easy-to-use and accurate AC/DC current measurements
Connects to some Tektronix oscilloscopes using the TekVPI™ probe interface
Provides automatic units scaling and readout on the oscilloscope display
Split-core construction allows easy circuit connection
Typically less than 1% DC gain error
Low Noise and DC Drift
Easy to Degauss and Autozero
Setup controls and probe status/diagnostic indicators on probe hardware and via oscilloscope UI display menu

Tektronix Oscilloscope Probes

The Tektronix current oscilloscope probe is designed for direct connection to oscilloscopes with the probe interface. This AC/DC current measurement probe provides greater than 120MHz bandwidth with selectable 5A and 30A measurement ranges. It also provides exceptional low current measurement capability and accuracy to current levels as low as 1mA.

Features and Benefits

Bandwidth is DC to 120MHz Rise time is 2.92ns Maximum DC and RMS current is 30A Maximum peal pulse voltage 50A Maximum Input voltage is 150V CAT II Split-core construction allows easy circuit connection Typically less than 1% DC gain error Low noise and DC drift Easy to Degauss and Autozero set-up controls and probe status/diagnostic indicators on probe hardware and via oscilloscope UI display menu Intelligent communication with TekVPI™ oscilloscopes provides: -Units scaling and readout. Automatic, on-screen readout of amps and magnitude. Manual set-up is not required Hand calculation from volts to amps is unnecessary -Push button degauss and Autozero functionality -Probe status and diagnostic indicator LEDs -Remote GPIB/USB probe control

Applications

Power supply design Design motor drive Electronic ballast Power semiconductors Switch mode control UPS systems Power converters Mobile communications Motor drives Industrial/consumer electronics

Certifications

CE compliant WEEE compliant

Supplied with

probe ground lead 6in (152.4mm) long, Nylon carrying case, instruction manual

Specificaties
Kenmerk Waarde
Probe Type Current
Safety Category CAT II 150 V, CAT II 300 V
Series TCP
Safety Category Level CAT II
Model Number p TCP0030A
Safety Category Voltage 150 V, 300 V
Bandwidth 120MHz
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
6 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4.360,00
(excl. BTW)
5.275,60
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 4.360,00
Related Products
MDO3000 oscilloscopes are designed to meet users' needs ...
Description:
MDO3000 oscilloscopes are designed to meet users' needs and aspirations now and into the future. Each model is multi-functional with integrated basic spectrum analyzer, Wave Inspector Navigation, MSO, serial and parallel bus triggering and analysis, and digital voltmeter. Optional instrument ...
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ...
Description:
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ratio 50 X/500 XMaximum differential test voltage (DC + Peak AC) 50 X: 150 V, 500 X: 1500 VMaximum input common mode voltage (voltage-to-earth Vrms) 600 V CATIII, 1000 V CATIIInput impedance ...
The Digilent BNC terminated oscilloscope probe is perfect ...
Description:
The Digilent BNC terminated oscilloscope probe is perfect to use with the Analogue Discovery™ in conjunction with the Discovery BNC adapter. • Bandwidth for 1x DC to 6MHz and 10x DC to 100MHz • Selectable 1X/10X input attenuation• Input resistance ...
For design, validation, debugging and characterization of common ...
Description:
For design, validation, debugging and characterization of common high-speed serial bus designs including I2C, CAN/LIN, SPI, Serial ATA, Ethernet (GbE), USB 2.0, FireWire (1394b); signal integrity, jitter and timing analysis; manufacturing engineering and test. Accurate measurements for serial and digital ...