STMicroelectronics Analogue Current Sensing Amplifier Single 8-Pin SOP
- RS-stocknr.:
- 248-4910P
- Fabrikantnummer:
- TSC200
- Fabrikant:
- STMicroelectronics
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 248-4910P
- Fabrikantnummer:
- TSC200
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Power Supply Type | Single | |
| Product Type | Current Sensing Amplifier | |
| Maximum Supply Voltage | 18V | |
| Minimum Supply Voltage | 2.7V | |
| CMRR - Common Mode Rejection Ratio | 80dB | |
| Supply Current | 5mA | |
| Mount Type | Surface | |
| Package Type | SOP | |
| Pin Count | 8 | |
| Minimum Operating Temperature | -40°C | |
| Height | 1.75mm | |
| Length | 4.9mm | |
| Standards/Approvals | No | |
| Output Type | Analogue | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Power Supply Type Single | ||
Product Type Current Sensing Amplifier | ||
Maximum Supply Voltage 18V | ||
Minimum Supply Voltage 2.7V | ||
CMRR - Common Mode Rejection Ratio 80dB | ||
Supply Current 5mA | ||
Mount Type Surface | ||
Package Type SOP | ||
Pin Count 8 | ||
Minimum Operating Temperature -40°C | ||
Height 1.75mm | ||
Length 4.9mm | ||
Standards/Approvals No | ||
Output Type Analogue | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The STMicroelectronics product is a high side current sense amplifier which delivers an analog voltage output. It can sense current via a shunt resistor over a wide range of common mode voltages. It is available with an amplification gain of 20 V per V. It integrates an open drain comparator with output latch function and an internal 0.6 V voltage reference connected to its input. External resistor divider can then set the switching threshold.
2.7 to 18 V supply voltage
0.6 V internal reference
Internal open drain comparator
Latching capability on comparator
High accuracy