Texas Instruments Current Monitor Single 8-Pin SOIC
- RS-stocknr.:
- 661-2491P
- Fabrikantnummer:
- INA271AID
- Fabrikant:
- Texas Instruments
Bulkkorting beschikbaar
Subtotaal 25 eenheden (geleverd in een buis)*
€ 72,25
(excl. BTW)
€ 87,50
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 25 - 99 | € 2,89 |
| 100 - 249 | € 2,63 |
| 250 - 499 | € 2,57 |
| 500 + | € 2,50 |
*prijsindicatie
- RS-stocknr.:
- 661-2491P
- Fabrikantnummer:
- INA271AID
- Fabrikant:
- Texas Instruments
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Texas Instruments | |
| Product Type | Current Monitor | |
| Power Supply Type | Single | |
| Maximum Supply Voltage | 18V | |
| Minimum Supply Voltage | 2.7V | |
| CMRR - Common Mode Rejection Ratio | 80dB | |
| Number of Channels | 1 | |
| Supply Current | 700μA | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| GBP - Gain Bandwidth Product | 130kHz | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | No | |
| Series | INA271 | |
| Length | 4.9mm | |
| Height | 1.58mm | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Texas Instruments | ||
Product Type Current Monitor | ||
Power Supply Type Single | ||
Maximum Supply Voltage 18V | ||
Minimum Supply Voltage 2.7V | ||
CMRR - Common Mode Rejection Ratio 80dB | ||
Number of Channels 1 | ||
Supply Current 700μA | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 8 | ||
GBP - Gain Bandwidth Product 130kHz | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals No | ||
Series INA271 | ||
Length 4.9mm | ||
Height 1.58mm | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
Current Sense Amplifiers Analogue Output, Texas Instruments
Current and power measurement for real-time system protection, feedback control and high-accuracy system monitoring.
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.