Knipex Knipex 1.7 mm With Bevel Side cutter
- RS-stocknr.:
- 267-7140
- Artikelnummer Distrelec:
- 301-78-456
- Fabrikantnummer:
- 79 02 125 S1
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 92,83
(excl. BTW)
€ 112,32
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 4 stuk(s) vanaf 23 november 2026
- Plus verzending 1 stuk(s) vanaf 23 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 92,83 |
*prijsindicatie
- RS-stocknr.:
- 267-7140
- Artikelnummer Distrelec:
- 301-78-456
- Fabrikantnummer:
- 79 02 125 S1
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Precision Electronic Diagonal Cutter | |
| Non-Sparking | No | |
| Overall Length | 125mm | |
| Jaw Width | 11mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Application | Electronic, Fine Mechanics | |
| Jaw Material | Ball Bearing Chrome Steel | |
| ESD Safe | No | |
| Grip Material | Multi Component Grip | |
| Maximum Cutting Capacity | 1.7mm | |
| Standards/Approvals | DIN ISO 9654, REACH | |
| Cut Type | With Bevel | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Product Type Side cutter | ||
Sub Type Precision Electronic Diagonal Cutter | ||
Non-Sparking No | ||
Overall Length 125mm | ||
Jaw Width 11mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Application Electronic, Fine Mechanics | ||
Jaw Material Ball Bearing Chrome Steel | ||
ESD Safe No | ||
Grip Material Multi Component Grip | ||
Maximum Cutting Capacity 1.7mm | ||
Standards/Approvals DIN ISO 9654, REACH | ||
Cut Type With Bevel | ||
Niet conform
- Land van herkomst:
- DE
KNIPEX 79 02 125 S1 Precision Electronics Diagonal Cutter e.g. for opening plastic cable connectors with multi-component handles burnished 125 mm
79 02 125 S1 Precision Electronics Diagonal Cutter Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. Very precisely ground and Sharp cutting edges with very small bevels for EXACT cutting on delicate electronic components
also available without bevel for flush cutting. Cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC. Approx. 20% lighter than conventional electronics pliers. Bolted joint with carefully manufactured joint surfaces for even, low-friction movement throughout the entire opening range. Smooth-running double spring for a gentle and even opening. Ergonomically optimised multi-component handles. round head. All edges on the head are rounded - reduces the risk of damage to the insulation when making corrections to cable harnesses - Cutting capacities medium hard wire (diameter): Ø 1.3mm- Cutting capacities hard wire (diameter): Ø 0.7mm- Cutting capacities soft wire (diameter): Ø 0.2 – 1.7mm- Jaw length (B): 10mm- Jaw thickness (joint) (D): 6.5mm- Head width (A): 11mm
Features and Benefits
Round Head
All Edges On The Head Are Rounded - Reduces The Risk Of Damage To The Insulation When Making Corrections To Cable Harnesses.
All Edges On The Head Are Rounded - Reduces The Risk Of Damage To The Insulation When Making Corrections To Cable Harnesses.
Technical attributes
Precision Pliers For Ultra Fine Cutting Work, E. G. In Electronics And Fine Mechanics
Very Precisely Ground And Sharp Cutting Edges With Very Small Bevels For Exact Cutting On Delicate Electronic Components
Also Available Without Bevel For Flush Cutting
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 64 Hrc
Approx. 20% Lighter Than Conventional Electronics Pliers
Very Precisely Ground And Sharp Cutting Edges With Very Small Bevels For Exact Cutting On Delicate Electronic Components
Also Available Without Bevel For Flush Cutting
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 64 Hrc
Approx. 20% Lighter Than Conventional Electronics Pliers
Gerelateerde Links
- Knipex Knipex 1.7 mm With Bevel Side cutter
- Knipex Knipex ESD Safe 1.7 mm With Bevel Side cutter
- Knipex Knipex 1.7 mm Without Bevel Side cutter
- Knipex Knipex ESD Safe 1.7 mm Without Bevel Side cutter
- Knipex Knipex 1.7 mm Small Bevel Side cutter
- Knipex Knipex 1.4 mm With Bevel Side cutter
- Knipex Knipex 1.5 mm With Bevel Side cutter
- Knipex Knipex 1.3 mm With Bevel Side cutter
