Knipex Knipex 3.8 mm With Bevel Concreters Nipper
- RS-stocknr.:
- 267-7748
- Artikelnummer Distrelec:
- 110-35-710
- Fabrikantnummer:
- 99 11 300
- Fabrikant:
- Knipex
Subtotaal (1 eenheid)*
€ 35,42
(excl. BTW)
€ 42,86
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 14 stuk(s) vanaf 14 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 35,42 |
*prijsindicatie
- RS-stocknr.:
- 267-7748
- Artikelnummer Distrelec:
- 110-35-710
- Fabrikantnummer:
- 99 11 300
- Fabrikant:
- Knipex
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Knipex | |
| Product Type | Concreters Nipper | |
| Sub Type | Cutter | |
| Non-Sparking | No | |
| Overall Length | 300mm | |
| Jaw Length | 25mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| ESD Safe | No | |
| Jaw Material | High Grade Special Tool Steel | |
| Grip Material | Plastic Coated | |
| Standards/Approvals | DIN ISO 9242, REACH | |
| Maximum Cutting Capacity | 3.8mm | |
| Cut Type | With Bevel | |
| Alles selecteren | ||
|---|---|---|
Merk Knipex | ||
Product Type Concreters Nipper | ||
Sub Type Cutter | ||
Non-Sparking No | ||
Overall Length 300mm | ||
Jaw Length 25mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
ESD Safe No | ||
Jaw Material High Grade Special Tool Steel | ||
Grip Material Plastic Coated | ||
Standards/Approvals DIN ISO 9242, REACH | ||
Maximum Cutting Capacity 3.8mm | ||
Cut Type With Bevel | ||
Niet conform
- Land van herkomst:
- DE
KNIPEX 99 11 300 High Leverage Concreters' Nipper high lever transmission with plastic coating black atramentized 300 mm
99 11 300 High Leverage Concreters' Nipper 25% less effort required compared to conventional concreters' nippers of the same size. extra-slim form for tying deep mounted steel rods. To lace concrete reinforcing steel with binding wire from a roll. Wire is twisted and cut in a single pass. High-leverage joint, minimising strain, even when thick binding wires are used. The high damping of the cutting stroke on cutting through the binding wire reduces the strain on tendons and muscles. Cutting edges additionally hardened
cutting edge hardness approx. 61 HRC. - Cutting capacities hard wire (diameter): Ø 2.0mm- Cutting capacities medium hard wire (diameter): Ø 3.8mm- Head width (W3): 25.0mm- Cutting edge length mm: 25.0mm
Features and Benefits
25% Less Effort Required Compared To Conventional Concreters' Nippers Of The Same Size
Extra-Slim Form For Tying Deep Mounted Steel Rods
Extra-Slim Form For Tying Deep Mounted Steel Rods
Technical attributes
To Lace Concrete Reinforcing Steel With Binding Wire From A Roll
Wire Is Twisted And Cut In A Single Pass
High-Leverage Joint, Minimising Strain, Even When Thick Binding Wires Are Used
The High Damping Of The Cutting Stroke On Cutting Through The Binding Wire Reduces The Strain On Tendons And Muscles
Cutting Edges Additionally Hardened
Wire Is Twisted And Cut In A Single Pass
High-Leverage Joint, Minimising Strain, Even When Thick Binding Wires Are Used
The High Damping Of The Cutting Stroke On Cutting Through The Binding Wire Reduces The Strain On Tendons And Muscles
Cutting Edges Additionally Hardened
Gerelateerde Links
- Knipex 99 11 3.3 mm Bevel Concreters Nipper
- Knipex Knipex 3.1 mm Without Bevel Concreters Nipper
- Knipex Knipex 2.4 mm With Bevel Concreters Nipper
- Knipex Knipex 2.8 mm With Bevel Concreters Nipper
- Knipex Knipex 1.8 mm With Bevel Concreters Nipper
- Knipex 99 00 3.1 mm Bevel Concreters Nipper
- Knipex 300mm Concreters Nipper 3.8 mm
- Knipex 99 01 2.4 mm Bevel Concreters Nipper
