HARTING, D-Sub Standard Series, Male Crimp D-Sub Connector Contact, Gold Crimp 20 AWG
- RS-stocknr.:
- 741-2835P
- Fabrikantnummer:
- 09670008176
- Fabrikant:
- HARTING
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 250 eenheden (geleverd in een zak)*
€ 60,50
(excl. BTW)
€ 73,25
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 860 stuk(s) vanaf 16 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 250 - 495 | € 0,242 |
| 500 - 1245 | € 0,238 |
| 1250 - 2495 | € 0,23 |
| 2500 + | € 0,224 |
*prijsindicatie
- RS-stocknr.:
- 741-2835P
- Fabrikantnummer:
- 09670008176
- Fabrikant:
- HARTING
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | HARTING | |
| Product Type | D-Sub Connector Contact | |
| Gender | Male | |
| Contact Material | Copper Alloy | |
| Contact Plating | Gold | |
| Current | 6.5A | |
| Maximum Contact Resistance | 10mΩ | |
| Contact Type | Crimp | |
| Minimum Wire Size mm² | 0.25mm² | |
| Maximum Wire Size mm² | 0.52mm² | |
| Series | D-Sub Standard | |
| Length | 14.48mm | |
| Termination Type | Crimp | |
| Standards/Approvals | No | |
| Minimum Wire Size AWG | 24AWG | |
| Maximum Wire Size AWG | 20AWG | |
| Alles selecteren | ||
|---|---|---|
Merk HARTING | ||
Product Type D-Sub Connector Contact | ||
Gender Male | ||
Contact Material Copper Alloy | ||
Contact Plating Gold | ||
Current 6.5A | ||
Maximum Contact Resistance 10mΩ | ||
Contact Type Crimp | ||
Minimum Wire Size mm² 0.25mm² | ||
Maximum Wire Size mm² 0.52mm² | ||
Series D-Sub Standard | ||
Length 14.48mm | ||
Termination Type Crimp | ||
Standards/Approvals No | ||
Minimum Wire Size AWG 24AWG | ||
Maximum Wire Size AWG 20AWG | ||
- Land van herkomst:
- DE
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
• Stock number 740-6657 is an Insertion and Extraction Tool
• Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807