HARTING, D-Sub Standard Series, size 1.8 mm Female Crimp Circular Connector Contact, Gold over Nickel Signal 18 AWG

RS-stocknr.:: 755-3851
Fabrikantnummer:: 09670003476
Fabrikant:: HARTING

HARTING, D-Sub Standard Series, size 1.8 mm Female Crimp Circular Connector Contact, Gold over Nickel Signal 18 AWG

Bulkkorting beschikbaar

Subtotaal (1 zak van 25 eenheden)*

€ 38,225

(excl. BTW)

€ 46,25

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

325 stuk(s) klaar voor verzending
225 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per Zak*
25 - 25	€ 1,529	€ 38,23
50 +	€ 1,498	€ 37,45

*prijsindicatie

RS-stocknr.:: 755-3851
Fabrikantnummer:: 09670003476
Fabrikant:: HARTING

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	HARTING
	Product Type	Circular Connector Contact
	Gender	Female
	Contact Material	Nickel
	Contact Plating	Gold over Nickel
	Maximum Contact Resistance	20mΩ
	Contact Type	Signal
	Minimum Wire Size mm²	0.33mm²
	Maximum Wire Size mm²	0.82mm²
	Series	D-Sub Standard
	Contact Size	1.8 mm
	Termination Type	Crimp
	Length	13.6mm
	Standards/Approvals	No
	Maximum Wire Size AWG	18AWG
	Minimum Wire Size AWG	22AWG

	Alles selecteren
	Merk HARTING
	Product Type Circular Connector Contact
	Gender Female
	Contact Material Nickel
	Contact Plating Gold over Nickel
	Maximum Contact Resistance 20mΩ
	Contact Type Signal
	Minimum Wire Size mm² 0.33mm²
	Maximum Wire Size mm² 0.82mm²
	Series D-Sub Standard
	Contact Size 1.8 mm
	Termination Type Crimp
	Length 13.6mm
	Standards/Approvals No
	Maximum Wire Size AWG 18AWG
	Minimum Wire Size AWG 22AWG

Land van herkomst:: CH

Harting D-Sub Standard Series Circular Connector Contact, 1.8mm Contact size, Female Gender - 9670003476

This circular connector contact provides a female signal contact solution for D-Sub compatible assemblies, designed for crimp termination in industrial electrical and electronic systems. It is intended for use where reliable signal transmission and Compact contact interfaces are required within automation, electrical and mechanical equipment.

Features & Benefits

• Gold plating over nickel ensures corrosion resistance and consistent conductivity
• Low contact resistance improves signal integrity at 20mΩ maximum
• Accepts conductor sizes from 22 AWG to 18 AWG for wiring flexibility
• Signal contact geometry sized at 1.8mm supports Compact connector layouts
• Crimp termination delivers secure mechanical and electrical connection
• Length of 13.6mm permits Compact installation within connector housings

Applications

• Suitable for wiring D-Sub style signal interfaces in control cabinets
• Ideal for panel-mount connector harnesses in automation systems
• Used with cable assemblies requiring Compact female signal contacts
• Can be used for signal interconnects in test and measurement rigs

What conductor cross-sections can it accommodate for crimping?

It supports conductor cross-sections from 0.33 mm² up to 0.82 mm², corresponding to 22 AWG through 18 AWG, enabling compatibility with common signal wiring gauges.

How does the plating affect long-term electrical performance?

The contact features a gold layer over a nickel substrate which provides a low-impedance contact surface while the nickel underlayer contributes mechanical robustness beneath the gold finish.

What termination method is required for reliable connections?

Crimp termination is specified

a proper crimping tool and compatible ferrules or insulated terminals should be used to achieve repeatable electrical and mechanical performance.

What is the expected electrical resistance at the contact interface?

The maximum measured contact resistance is specified at 20 mΩ, supporting applications where low resistance is necessary for signal fidelity.