STMicroelectronics A6983I DC/DC Converter, 38V dc/ 4.5 A, 38V dc Input, 3.5V Input 10 W, Surface, 150 °C Max Temp -40 °C
- RS-stocknr.:
- 215-206
- Fabrikantnummer:
- A6983IQTR
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 2,77
(excl. BTW)
€ 3,35
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 3.000 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 2,77 |
| 10 - 24 | € 2,08 |
| 25 - 99 | € 1,93 |
| 100 - 249 | € 1,91 |
| 250 + | € 1,88 |
*prijsindicatie
- RS-stocknr.:
- 215-206
- Fabrikantnummer:
- A6983IQTR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | DC/DC Converter | |
| Output Voltage 1 | 38V dc | |
| Minimum Input Voltage | 3.5V | |
| Maximum Input Voltage | 38V dc | |
| Output Current 1 | 4.5A | |
| Mount Type | Surface | |
| Number of Outputs | 1 | |
| Number of Pins | 16 | |
| Package Type | QFN-16 | |
| Maximum Output Power | 10W | |
| Standards/Approvals | RoHS, AEC-Q100 | |
| Series | A6983I | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type DC/DC Converter | ||
Output Voltage 1 38V dc | ||
Minimum Input Voltage 3.5V | ||
Maximum Input Voltage 38V dc | ||
Output Current 1 4.5A | ||
Mount Type Surface | ||
Number of Outputs 1 | ||
Number of Pins 16 | ||
Package Type QFN-16 | ||
Maximum Output Power 10W | ||
Standards/Approvals RoHS, AEC-Q100 | ||
Series A6983I | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
- Land van herkomst:
- TH
The STMicroelectronics Primary output voltage can be accurately adjusted, whereas the isolated secondary output is derived by using a given transformer ratio. No optocoupler is required. The primary sink capability up to -4.5 A (even during soft-start) allows a proper energy transfer to the secondary side, as well as enables a tracked soft-start of the secondary output. The control loop is based on a Peak current mode architecture and the device operates in forced PWM.
Internal soft start
Enable pin
Overvoltage protection
Output voltage sequencing
Gerelateerde Links
- STMicroelectronics A6983I DC/DC Converter 38V dc Input Surface, 150 °C Max Temp -40 °C
- STMicroelectronics A6983 DC/DC Converter 38V dc Input Surface, 150 °C Max Temp -40 °C Min
- Manson SDC DC/DC Converter 38V dc Input 12 A Clip, 50 °C Max Temp -10 °C Min Temp
- Manson SDC DC/DC Converter 38V dc Input 5 A Clip, 50 °C Max Temp -10 °C Min Temp
- Custom Power Design SM 2430 DC/DC Converter 38V dc Input 50 °C Max Temp -20 °C Min
- Murata UWS Isolated DC-DC Converter 75V Input Through Hole 85 °C Max Temp -40 °C Min
- TRACOPOWER DC/DC Converter 75V Input 4.5 A 90 °C Max Temp -40 °C Min Temp
- TRACOPOWER TEP 200 DC/DC Converter 75V Input 4.5 A 75 °C Max Temp -40 °C Min Temp