Texas Instruments TPS82130SILT Buck Converter, Adjustable, 0.9 → 6 V, 0A 8-Pin, uSIP

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Step-Down Converter Power Modules with Integrated Inductor, Texas Instruments

SIMPLE SWITCHER® DC/DC switching regulator
Adjustable Output Voltage
Power Good Flag Function
Pin-Selectable Switching Modes
Internal Compensation and Soft-Start
Current Limit, Thermal Shutdown, and UVLO Protection
Miniature Package

DC/DC Switching Regulator Converters (Integrated Switch), Texas Instruments

The range of highly integrated high-efficiency switching voltage regulators from Texas Instruments includes Step-up (Boost), Step-down (Buck), Step-up/down (Boost/Buck) and Inverting types providing efficient solutions for every DC Voltage Regulator application.

Specificaties
Kenmerk Waarde
Minimum Output Voltage 0.9 V
Maximum Output Voltage 6 V
Minimum Input Voltage 3 V
Maximum Input Voltage 17 V
Minimum Output Current 0A
Maximum Output Current 3A
Converter Type Step Down
Number of Outputs 1
Output Type Adjustable
Mounting Type Surface Mount
Package Type USiP
Pin Count 8
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Height 1.45mm
Maximum Switching Frequency 2 MHz
Line Regulation 0.002 %/V
Length 3.1mm
Dimensions 3.1 x 2.9 x 1.45mm
Load Regulation 0.12 %/A
Switching Regulator Yes
Width 2.9mm
89 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
68 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2,28
(excl. BTW)
2,76
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2,28
Vanwege het beperkte aanbod kan RS op dit moment geen backorders accepteren.
Verpakkingsopties
Related Products
Linear Technology product series of synchronous and non-synchronous ...
Description:
Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, ...
The LT8300 is a micropower high voltage isolated ...
Description:
The LT8300 is a micropower high voltage isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with a single ...
Linear Technology presents a range of micropower monolithic ...
Description:
Linear Technology presents a range of micropower monolithic step-down buck converters these are intended for applications that need to increase efficiency at light loads. These devices produce low standby quiescent currents when in burst mode. They can be used in ...
Analog Devices isoPower® technology integrates isolated DC-to-DC converts ...
Description:
Analog Devices isoPower® technology integrates isolated DC-to-DC converts with data isolation into a single package. It is operating with the award winning iCoupler® chip scale transformers. Regulated output105°C maximum high temperature operation2.5 kV rms Insulation for ADUM5000/ADUM50103.75 kV rms Insulation ...