TRACOPOWER TEN 30 DC/DC Converter, 12V dc/ 2.5 A, 18V dc Input, 9V Input 30 W, Through Hole, 80 °C Max Temp -40 °C Min

Bekijk alle DC-DC Converters
Bulkkorting beschikbaar

Subtotaal (1 tube van 10 eenheden)*

€ 630,83

(excl. BTW)

€ 763,30

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Tube(s)
Per tube
Per stuk*
1 - 4€ 630,83€ 63,083
5 - 9€ 611,91€ 61,191
10 - 24€ 592,98€ 59,298
25 - 49€ 567,74€ 56,774
50 +€ 542,52€ 54,252

*prijsindicatie

RS-stocknr.:
166-5548
Fabrikantnummer:
TEN 30-1212
Fabrikant:
TRACOPOWER
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

TRACOPOWER

Product Type

DC/DC Converter

Output Voltage 1

12V dc

Maximum Input Voltage

18V dc

Minimum Input Voltage

9V

Output Current 1

2.5A

Mount Type

Through Hole

Input Ratio

2:1

Number of Outputs

1

MTBF

1450000h

Output Voltage Adjustment Range

-10 to 10 %

Number of Pins

6

Isolation Voltage

1.5kV dc

Maximum Output Power

30W

Package Type

Shielded Metal Case with Insulated Baseplate

Standards/Approvals

No

Length

50.8mm

Series

TEN 30

Depth

10.2mm

Minimum Operating Temperature

-40°C

Efficiency

89%

Maximum Operating Temperature

80°C

Land van herkomst:
TW

Traco 30W Single/Dual Output High Power Density Regulated Isolated DC-DC Converter - TEN 30 Series


30W single/dual output high power density regulated isolated DC-DC converter modules with a wide input voltage range and encapsulated metal package. These single/dual output high power density regulated isolated DC-DC converter modules have a high efficiency which allows an operating temperature range of -40°C to +85°C. Typical applications for these isolated DC-DC converter modules include mobile equipment, instrumentation and distributed power architectures in communication and industrial electronics.

High power density, 25.4x50.8x10.2mm package

Wide 2:1 input voltage range

Regulated outputs

±10% adjustable output voltage by using external resistors (single output models only)

1.5kV input / output isolation

High efficiency up to 91%

No minimum load required

Input filter meets EN 55022 Class A

Remote On/Off

Over-temperature, over-voltage, over-load and short circuit protection

Shielded metal case with insulated baseplate

Industry standard pin-out

Note

Operating temperature is with derating of 4% per °C above 65°C.
MTBF to MIL-HDBK-217F (25°C).
Load regulation for dual output models is for balanced load.
For suitable heatsink see stock number 745-1234
For suitable common mode chokes see stock number 745-1222 (L1) and 745-1231 (L2)

Standards

EN 60950-1, UL 60950-1, IEC 60950-1

Gerelateerde Links