TDK-Lambda DPX30W DC/DC Converter, 12V dc/ 2.5 A, 24V dc Input, 24V dc Input, DIN Rail 30 W, 85 °C Max Temp -40 °C Min
- RS-stocknr.:
- 204-0465
- Fabrikantnummer:
- DPX30-24WS12
- Fabrikant:
- TDK-Lambda
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 153,34
(excl. BTW)
€ 185,54
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 8 stuk(s) vanaf 25 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 153,34 |
| 5 - 9 | € 148,74 |
| 10 - 24 | € 144,14 |
| 25 - 49 | € 139,54 |
| 50 + | € 134,94 |
*prijsindicatie
- RS-stocknr.:
- 204-0465
- Fabrikantnummer:
- DPX30-24WS12
- Fabrikant:
- TDK-Lambda
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TDK-Lambda | |
| Output Voltage 1 | 12V dc | |
| Product Type | DC/DC Converter | |
| Minimum Input Voltage | 24V dc | |
| Maximum Input Voltage | 24V dc | |
| Output Current 1 | 2.5A | |
| Mount Type | DIN Rail | |
| Number of Outputs | 1 | |
| MTBF | 112400h | |
| Ripple and Noise | 100mV | |
| Output Voltage Adjustment Range | ±10 % | |
| Isolation Voltage | 1.6kV | |
| Maximum Output Power | 30W | |
| Standards/Approvals | CE | |
| Width | 25.4mm | |
| Weight | 170g | |
| Series | DPX30W | |
| Length | 125mm | |
| Depth | 125mm | |
| Minimum Operating Temperature | -40°C | |
| Efficiency | 0.84% | |
| Maximum Operating Temperature | 85°C | |
| Alles selecteren | ||
|---|---|---|
Merk TDK-Lambda | ||
Output Voltage 1 12V dc | ||
Product Type DC/DC Converter | ||
Minimum Input Voltage 24V dc | ||
Maximum Input Voltage 24V dc | ||
Output Current 1 2.5A | ||
Mount Type DIN Rail | ||
Number of Outputs 1 | ||
MTBF 112400h | ||
Ripple and Noise 100mV | ||
Output Voltage Adjustment Range ±10 % | ||
Isolation Voltage 1.6kV | ||
Maximum Output Power 30W | ||
Standards/Approvals CE | ||
Width 25.4mm | ||
Weight 170g | ||
Series DPX30W | ||
Length 125mm | ||
Depth 125mm | ||
Minimum Operating Temperature -40°C | ||
Efficiency 0.84% | ||
Maximum Operating Temperature 85°C | ||
- Land van herkomst:
- TW
The TDK-Lambda DPX DIN rail mount DC-DC converters are ideal for generating additional, isolated and regulated voltages from the common used 24Vdc DIN rail bus. Fully protected and with Class B EMC performance, the DPX is available with single, dual or triple output models and power levels from 15 to 60W. All commonly requested voltages are covered by the series, and the units will operate from 12V, 24V or 48V nominal dc inputs with either 2:1 or 4:1 ranges.
Meet EN55022 Class B
Input fuse protection
Input reverse polarity protection
Input in-rush current protection
Overload and short circuit protection
Over voltage protection
Reliable Snap-On for DIN rail TS-35/7.5 or TS-35/15
I/O-isolation 1600 VDC
Output DC-OK indicator
Gerelateerde Links
- TDK-Lambda DPX30W DC/DC Converter -15 V dc/ 1 A 24V dc Input 85 °C Max Temp -40
- TDK-Lambda DPX30W DC/DC Converter 48V dc Input DIN Rail 30 W, 85 °C Max Temp -40 °C Min
- TDK-Lambda DPX30W DC/DC Converter 48V dc Input DIN Rail 30 W, 85 °C Max Temp -40 °C Min
- TDK-Lambda DPX30W DC/DC Converter -15 V dc/ 1 A 48V dc Input 85 °C Max Temp -40
- TDK-Lambda DPX15W DC/DC Converter 24V dc Input DIN Rail 15 W, 85 °C Max Temp -40 °C Min
- TDK-Lambda DPX DC/DC Converter 24V dc Input DIN Rail 40 W, 85 °C Max Temp -40 °C Min Temp
- TDK-Lambda PXG-M DC/DC Converter 75V Input Surface, 105 °C Max Temp -40 °C Min Temp
- TDK-Lambda PXG-M DC/DC Converter 75V Input Surface, 105 °C Max Temp -40 °C Min Temp