Parker, DC Motor Controller, 1 Phase, Voltage Control, 110 → 500 V, 8 A, Wall Mount

  • RS-stocknr. 240-6719
  • Fabrikantnummer 514C-08-00-00-00
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

514C Range (Regenerative) Speed Controllers

The 514C range of isolated dc motor speed controllers provide fully regenerative (four quadrant) control of dc shunt and permanent magnet motors. They are particularly suitable for overhauling load applications or where accurately controlled braking is required.

Fully regenerative, four-quadrant motor control
Internal logic control of power supply ac contactor
Ramped speed input, auxiliary and inverted auxiliary inputs

Features of 512C and 514C Range Speed Controllers

Jumper-selectable single phase input voltage 110//120 or 220//240 or 380/415V ±10%
Linear current feedback allowing accurate torque
Zero speed or zero set point relay driver output - 24Vdc
Total setpoint output
Stall detection and trip
Field bridge suitable for UK or continental voltages
Overload capacity 150% of nominal current for 60s
Adjustable maximum current level
Adjustable maximum and minimum speed

Adjustable I.R. compensation (for armature voltage feedback speed control)
Adjustable speed stability
Independent control of speed ramp, both up and down from 0-40s
Indication of mains supply on, stall trip and overcurrent trip
Switch selectable current calibration
Switch selectable Armature/Tacho generator feedback
Buffered 0-10V output for a speed reference or meter
Buffered 0-7.5V output for a current meter (7.5V = 150%)

Supplied with

a comprehensive instruction manual.

Specificaties
Kenmerk Waarde
Supply Voltage 110 → 500 V
Current Rating 8 A
Voltage Rating 360 V dc
Compatible Motor Type Permanent Magnet, Shunt
Control Input Voltage
Mounting Style Wall Mount
Phase 1
Length 240mm
Width 160mm
Depth 90mm
Dimensions 240 x 160 x 90 mm
Operating Temperature Range 0 → +40 °C
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
688,62
(excl. BTW)
833,23
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 688,62
Related Products
Small sizeHigh current outputCurrent limitZero current limitOvervoltage brakeSpeed ...
Description:
Small sizeHigh current outputCurrent limitZero current limitOvervoltage brakeSpeed settingFlexible control inputsImpulse / continuous modeRail base mountableDigital parameter setting48V version of EM-241CCurrent limit setting input ( new )Freewheel options ( new )2 or 16kHz PWM freq. ( new )Prog ver C-v1.5Eight ...
High current outputBrake load outputCurrent limitCurrent limit for ...
Description:
High current outputBrake load outputCurrent limitCurrent limit for brake alsoZero-current limitSpeed setting/adjustmentFlexible control inputsImpulse / continuous modeRail base mountableDigital parameter settingC versions program2/16kHz pwm freq. optionsFreewheel optionsAutoreverse optionRunning indication ...
Analog feedback5V, 10V or 4-20mA controlPosition accuracy max. ...
Description:
Analog feedback5V, 10V or 4-20mA controlPosition accuracy max. 0,1%Solid state power stageSmall size, great performanceDigitally settable parametersVerstile dynamic settingsHousing options availablePwm Freq, 2/16kHz ( since prog. v1.3 )Improved accurate , parameter 17, prog. ( v1.4).
Quadrature pulse countingMultiple dynamic settingsSolid state power stageOne ...
Description:
Quadrature pulse countingMultiple dynamic settingsSolid state power stageOne or two pulse feedbackVoltage or mA controlPosition accuracy max. 0.2%Versatile setting optionsDigitally settable parametersHousing options available.